Choose between 1 or 2 products depending on your use
Choosing a central cleaning system that allows you to switch between two products is the most efficient solution. This lets you
alternate between two product formulations, such as a degreaser and a disinfectant, or an alkaline and an acidic detergent.
The choice between the two products, or rinsing with clean water, is made simply using a lever located on the unit. The single-product cleaning system remains the simplest solution for initial setup, a small kitchen, or for occasional uses such as washing bins and wheeled containers with a multi-purpose cleaner.
Advantages of a disinfection unit with a stainless steel reel
A central washing and disinfection unit is suitable for use in professional kitchens, but also in other areas such as cleaning wheeled garbage containers with a special VO disinfectant cleaner. The difficulty with conventional washing units lies in their hose storage system, which requires manual winding of the hose onto a support. As a result, the hose can sometimes be difficult to reattach.
The reel system allows for immediate and efficient storage, providing true freedom of movement and avoiding hoses lying on the ground.
Reduction of the risk of falls by workers, damage to the pipe, etc.
While the cost is higher, the ergonomics and durability of the equipment will be greatly improved.
How to install a central cleaning system in the kitchen?
A cleaning station connects to a cold or mixed water supply and operates without electricity or compressed air. It is easily mounted to the wall by drilling a hole. A single-product cleaning station is best mounted on a solid wall. The 5-liter or 10-liter container holder, depending on the model, will also need to be attached.
The water supply is via a standard 20/27 fitting and a mixer tap can be added at the same time or separately.
Installing this equipment is therefore very easy and requires no special training.
Functioning and model selection
A venturi suction system uses water pressure to draw in the product. The choice of a calibration nozzle upstream of the product intake then allows for a precise dosage from 0.41% to 17.65% to be selected from a range of 14 colors.
Central cleaning systems can have several configurations with one or two products.
It will therefore be possible to alternate between the use of the two products.
Standard bottle cages are generally designed for 5-litre bottles, but there is the option to choose bottle cages for 10-litre bottles.
Using color nozzles
It allows you to define the calibration based on the desired concentration. Pack of 14 nozzles that clip directly onto the non-return valve.
Rose 0.41%
Violet 0.92%
Turquoise 1.47%
Yellow 1.65%
Orange 2.10%
Green 3.60%
Light brown 5.30%
Blue 7.35%
White 7.90%
Red 10.10%
Beige 15.00%
Black 16.80%
grey 17.65%
Without nozzle 17.65%
The cleaning plant in detail
Stainless steel braid and flexible
Withstands 110°C - 18 bar. Absorbs water hammer.
Shockproof gun
Solid brass body. Withstands 80°C - 25 bar. Fully covered in food-grade rubber. D1/2F connection. Equipped with quick coupler.
Wash hose
Medium-pressure industrial wash hose, 20 bar at 70°C. Food-grade construction. Non-staining, grease-resistant blue outer coating. High-tenacity polyester fiber reinforcement. High-adhesion intermediate layer.