Some industries need to vacuum up chips from machine tools, sawdust, liquid with particular compositions which will impose a specific motor size and tank material (stainless steel, epoxy steel, Numatic structofoam...).
What materials can be vacuumed? Choosing your industrial vacuum cleaner
Before selecting an industrial vacuum cleaner, you must first define the types of materials you will need to vacuum . Vacuum cleaners are designed to meet a variety of needs, including:
Fine dust: Ideal for environments where dust is omnipresent, such as carpentry or construction workshops.
Liquids: For areas where spills may occur, such as food processing plants.
Solid debris: Metal shavings, rubble, etc., requiring increased suction power.
| Material to be vacuumed | Requirement | Examples from the page |
| Fine dust (carpentry, construction) | Filtration, anti-clogging | Numatic NES570, NED570, NTD750 |
| Wood chips, cutting oils | Stainless steel tank, steel | Nilfisk OIL230 |
| Flammable dust | ATEX Zone 22, Class M | Nilfisk Attix 40-0M PC, 791-2M/B1 |
| Large volumes, dual engine | Two engines, cyclone | Numatic NTD750-C, NTD2003, SSIVD |
| Self-service car wash | Parts, robustness | Nilfisk SB Station, SB Tandem |
Numatic's industrial range
Numatic, a world leader in professional vacuum cleaners with the Nupro and even in the consumer market with the Henry, leveraged its expertise to address the specific needs of professional industrial vacuuming .
The Numatic range of industrial vacuum cleaners will provide you with a solution for every industrial vacuuming activity or problem.
The product ranges include NT750, NTD750, NTD750C - SSIVD - TEL390 - TEM390 - NES750 - NED750 - NED900 - HAS750...
Which vacuum cleaner should I choose for an ATEX type 22 zone?
These
Class M vacuum cleaners are suitable for use in ATEX Type 22 zones, where the risk of explosion is minimal but must still be considered. These devices have been designed with a large storage capacity for specific dusts, featuring stainless steel tanks, for use in hazardous environments.
ATEX standards in detail
Some devices are classified as ATEX. ATEX (Explosive Atmospheres) regulations are based on two European directives, 99/92/EC and 94/9/EC, which have been mandatory in all member states of the European Union since July 1, 2003. All manufacturers, distributors, and users of devices operating in potentially explosive atmospheres must comply with the safety and health requirements of these ATEX Directives . An explosive atmosphere is defined as a mixture of air and flammable substances in the form of gases, vapors, mists, or dusts, in which, after ignition, combustion spreads throughout the entire unburned mixture.
Examples of dust: metallic dust, flour… Devices must bear the standardized ATEX marking.
Workshop and garage vacuum cleaner
For a woodworking shop, garage, or small industrial setting, a 30- to 45-liter vacuum cleaner with a synchronized tool port (Numatic A series, Attix option) eliminates the need for two separate units and protects the motor. The Numatic NED570A and NED900A are examples.
Frequently asked questions about industrial vacuum cleaners
What is the difference between an industrial vacuum cleaner and a construction site vacuum cleaner?
Industrial vacuum cleaners continuously process dust, shavings, or liquids in workshops or factories. Construction vacuum cleaners are more mobile models, with a tool holder and self-cleaning filter, designed for use in building settings. The filtration class (L, M, or H) depends on the type of dust being vacuumed.
Can you vacuum water with an industrial vacuum cleaner?
Only if the model is designed for liquids: sealed tank, float, and appropriate filter. An industrial vacuum cleaner for dry dust should not be used to vacuum water. For liquids, choose a wet/dry vacuum cleaner, or an oil and chip model like the Nilfisk OIL230.
What is an ATEX vacuum cleaner?
An ATEX vacuum cleaner is a device certified for use in potentially explosive atmospheres, such as those containing flour, sugar, or metallic dust. It bears a mandatory ATEX marking and is selected according to the zone (zone 22 for dust, with minimal risk).
When to choose class M or H?
Class M is suitable for harmful dusts (wood, concrete, silica, flour). Class H is mandatory for carcinogenic or pathogenic dusts such as asbestos. See Class M and Class H vacuum cleaners.