Thick oils, liquids laden with shavings, large-capacity tanks on production lines: in high-speed workshops, recovering cutting fluids requires powerful suction. The Nilfisk ECO-OIL 22 oil recovery vacuum cleaner is the three-phase version in the range. Its 2200 W motor delivers an airflow of 5100 l/min , nearly twice that of the ECO-OIL 13, and a vacuum of 330 mbar , for quickly extracting viscous oils , coolants , and shavings . The 30 L chip separator retains solids, and microfiltration purifies liquids for recycling and reuse in machines.
The 180 L tank offers a very large recovery capacity , protected by an automatic shut-off when the tank is full . The independent 80 L/min discharge pump , combined with the drain gun and its 3.5 m hose , directly returns the filtered liquids to the machine tool or a container. A drain at the bottom of the tank facilitates the removal of residues. Powered by 400 V three-phase electricity , it reduces downtime on production lines and is ideal for mechanical engineering plants , high-speed machining workshops , bar turning facilities, and the automotive and aerospace industries.
Advantages of the Nilfisk OIL320:
Three-phase power : 2200 W and 5100 l/min airflow, almost twice that of the ECO-OIL 13
Viscous oils : a pressure drop of 330 mbar for thick fluids and large volumes
Recycled oils : the filtered liquids are reused in machine tools
Separation of chips and liquids : a 30 L separator retains the solids during suction.
Microfiltration : purifying liquids before recycling
Very large capacity : a 180L tank for high-speed production lines
80 l/min drain pump : liquids are poured directly using the supplied nozzle
Automatic shut-off when the tank is full : the machine is protected against overflows.
Less interrupted production : faster emptying of the tanks reduces machine downtime
Less waste to process : recovered oils are reused rather than disposed of.
Technical specifications of the Nilfisk OIL320:
- Power : 2200 W
- Air flow rate : 5100 l/min (85 l/s)
- Depression : 330 mbar (33 kPa)
- Noise level : 71 dB(A) (IEC)
- Tank capacity : 180 L
- Chip separator capacity : 30 L
- Discharge pump : independent, flow rate 80 l/min
- Filtration : polyurethane filter (Z8 17745) and polyester pre-filter (Z8 14643), liquid microfiltration
- Automatic shut-off when the tank is full : standard
- Draining : at the bottom of the tank and by pump with spray gun
- Power supply : 400 V three-phase, 50 Hz
- Electrical cable : 5 m
- Options : suction kit, phase inverter on the plug
- Dimensions (L x W x H) : 67 x 105 x 150 cm
- Weight : 135 kg