Draining a machine tool's oil and chip collection tank is a lengthy and messy operation that halts production and generates costly waste disposal. The Nilfisk ECO-OIL 13 oil recovery vacuum is specifically designed to recover oil , viscous liquids , and chips . Its 30L chip separator retains solids, while microfiltration purifies the recovered liquids, allowing the operator to reuse the oil and coolant .
Its 180 L tank offers a very large recovery capacity , and an automatic shut-off when the tank is full protects the machine. Once the tank is full, the independent 80 L/min discharge pump and the supplied drain gun with its 3.5 m hose allow the filtered liquids to be returned directly to the machine tool or a container, without handling jerrycans. A drain at the bottom of the tank completes the equipment. With its 320 mbar vacuum , 1300 W motor, and 230 V single-phase power supply, it can be installed in any workshop, without the need for a three-phase outlet. It reduces machine downtime and contributes to their proper maintenance. It is ideal for machining , bar turning , precision mechanics , and industrial maintenance workshops.
Advantages of Nilfisk OIL310:
Recycled oils : cutting oils and coolants are filtered for reuse.
Separation of chips and liquids : a 30 L separator retains the solids during suction.
Microfiltration : liquids are purified before being recycled
Extra large capacity : a 180L tank for emptying several containers without interruption
80 l/min drain pump : liquids are poured directly using the supplied nozzle
Automatic shut-off when the tank is full : the machine is protected against overflows.
Less downtime : emptying machine tool tanks is significantly accelerated.
230V connection : it can be installed in any workshop, without a three-phase installation.
Less waste to process : recovered oils are reused rather than disposed of.
Bottom tank drain : easy removal of residue at the end of use
Technical specifications of the Nilfisk OIL310:
- Power : 1300 W
- Air flow rate : 2700 l/min (45 l/s)
- Depression : 320 mbar (32 kPa)
- Noise level : 70 dB(A) (IEC)
- Tank capacity : 180 L
- Chip separator capacity : 30 L
- Discharge pump : independent, flow rate 80 l/min
- Filtration : polyurethane filter (Z8 17745) and polyester pre-filter (Z8 14643), liquid microfiltration
- Automatic shut-off when the tank is full : standard
- Draining : at the bottom of the tank and by pump with spray gun
- Power supply : 230 V single-phase, 50-60 Hz
- Electrical cable : 5 m
- Options : suction kit
- Dimensions (L x W x H) : 67 x 105 x 150 cm
- Weight : 120 kg