Single brush disc

Whether with brands like Janex or 3M, the range of abrasives for surfaces has never been so extensive. They allow you to meet all intervention and surface conditions for maintenance or restoration.

The different colors of the Scotch-Brite 3M range

Abrasive pads are distinguished by their color, which indicates their specific working area. Here is an overview of the most common colors used on professional machines:
- 3M black pad: This pad is for heavy-duty stripping only. A preliminary test is recommended before use. The recommended rotation speed is less than 250 rpm with a low-speed floor scrubber.
- Brown pad : It is ideal for stripping linoleum and vinyl floors, as well as for restoration and scrubbing. The recommended rotation speed is less than 250 rpm. Less aggressive than the black pad, it can be an alternative for older floors.
- 3M Green Pad : This pad is used for washing, scrubbing, and light stripping. It removes stubborn marks and is suitable for all types of flooring. Thanks to its open structure, it can be used on all industrial floors, even heavily soiled plastic floors. The recommended rotation speed is less than 250 rpm.
- 3M Red Pad : This pad is used for spray cleaning. It removes light marks , such as shoe prints, and leaves a glossy finish. It is suitable for all types of floors, and the recommended rotation speed is less than 600 rpm with a high-speed floor scrubber.
- 3M blue pad: For wet and dry cleaning of unprotected floors, dry stripping of delicate floors, and spray cleaning of unprotected surfaces. It allows for quick removal of marks. Single-disc scrubber up to 400 rpm - Automatic scrubber dryer.
- 3M White Pad: Specially designed for polishing , it provides a flawless finish. It can be used dry or with a spray on clean floors. The white pad is a high-speed, non-abrasive polishing disc designed for protected floors. It is suitable for all types of flooring, and the recommended rotation speed is less than 600 rpm.
- 3M Melamine Pad: Benefiting from the stain-removing properties of melamine, it is non-scratch and cleans deep down, removing dirt (shoe marks, black marks, greasy surfaces, etc.). It degreases and cleans microporous materials such as ceramic, stoneware, marble, terrazzo, concrete, tiles, sports flooring, etc., and leaves most of these materials with a high-gloss finish. Suitable for single-disc scrubbers up to 250 rpm and automatic floor scrubbers.

There are also specific discs such as parquet discs , steel wool for crystallization, bonnets for carpets, microfibers, etc.

Understanding single-disc discs

Polyester abrasive discs are essential accessories for use with single-disc floor scrubbers and automatic floor cleaners . They are designed for a variety of tasks, from cleaning and washing to polishing and sanding . These high-quality pads offer exceptional performance and are widely used in various sectors, such as cleaning companies, hospitals, the food industry, restaurants, corporate offices and supermarkets, public works, construction, and also by individuals seeking a professional solution.
These accessories are primarily characterized by two features: their diameter (expressed in mm) and their color. The diameter is chosen based on the size of your floor scrubber or floor cleaning machine's pad holder. Generally, standard floor scrubbers use 406 or 432 mm pads . Floor cleaning machines, depending on whether they have a single or double pad holder, use a much larger pad holder. It is therefore common to find smaller pad sizes on machines with two or even three holders. The color is determined by the task at hand and the surface being cleaned. It determines the grit size, except for parquet flooring pads, where the mesh size determines the grit for sanding or finishing.

The most common colors are organized as follows.

Black color: This color is reserved for stripping applications. A preliminary test is essential with this type of process disc. Rotation speed less than 250 rpm.
Brown color: It is used for stripping linoleum and plastic flooring . It is also used for restoration work. Rotation speed less than 250 rpm.
Green color: It is used for washing, scrubbing, and light stripping. It removes heavy-duty stains. Wet use on all types of floors. Rotation speed less than 250 rpm.
Red color: It is used for spray cleaning. Removes light marks such as shoe marks. Suitable for all types of flooring. Produces a glossy finish when used with a spray product. Rotation speed less than 600 rpm.
White color: The white disc is a polishing disc for achieving a flawless finish. It can be used dry or by spraying on a clean floor. It creates a wet look. Suitable for all types of flooring. Rotation speed less than 600 rpm. This is then referred to as a buffing disc.

Disc maintenance and use

It should be washed after each use, either with a hose or under running water. The purpose of this cleaning is to remove all wax particles, strippers, etc., from the disc that could compromise the quality of the work done. Many users simply throw it away after use to avoid this tedious task, but the environmental impact of this approach remains questionable. The advantage of using a quality product like 3M is its durability and very long reuse cycle.
If you have any doubts, please do not hesitate to contact us.

3M Scotch Brite quality in disc form: the benchmark

3M cleaning pads are industry standards in the professional cleaning sector. They are designed for use on all types of single-disc floor scrubbers and automatic floor scrubbers. The choice of pad color depends on the task at hand, while the diameter must match your machine's pad. Use and maintain the pads correctly to ensure optimal performance. Voussert is a leading Master Partner of 3M for public facilities in France, offering a comprehensive range of products and unbeatable prices. You'll find a solution to virtually every technical challenge.

Use and maintenance of 3M single-disc and automatic scrubber discs

For optimal use in cleaning operations, it is recommended to follow these steps:
- Before each use, clean the disc with clean water to remove any wax or stripper residue that could impair its performance. This can be done with a garden hose or a pressure washer.
- Install it on the drive tray of your machine, ensuring it is securely fastened. The tray should have tabs or adhesive to hold the disc in place while the machine is running.
Use it according to its color and the task at hand. Follow the recommended rotation speeds to avoid damaging the machine and the floor. Using it at too high a speed can damage the surface and your motor.
- After use, clean the disc by brushing it with a nylon brush under running water . Let it air dry before storing.
It is important to note that machine-washed discs may shrink by up to 20 mm after the first wash. Also, avoid washing discs at temperatures above 40°C, as this may reduce their lifespan. Do not reuse a disc while it is still damp.