3M Scotch Brite disc crystallization Mauve 432 mm package 5

Disk crystallization

Ref.. 12186

The Scotch-Brite purple disc from 3M is a diamond disc for cleaning and polishing marbles, marble stones and reconstituted marbles as well as for thermoplastic floors. Disc can be used in a scrubber or monobrush.

Read more
1 reviews
2 Cardboard in stock
Product in stock for the quantity indicated in the article.
-33%
166,50 € HT
(199,80 € TTC)
RRP (1)
250,00 € HT (300,00 € TTC)
Amount
available
In stock (5) Packaging Sales unit
2 Cardboard
By Cardboard 5 units

All about 3M Scotch Brite disc crystallization Mauve 432 mm package 5

Description
3M Mauve Scotch Brite crystallization disc. Can be used as a scrubber or single brush.
Diamond blade for cleaning and polishing marbles, marble stones and reconstituted marbles as well as for thermoplastic floors.
It is made of high quality synthetic fibers forming an open structure nonwoven web. Abrasive particles including diamond particles are bonded to this structure by a very strong resin.
The Mauve disc provides excellent dirt removal and extreme shine (40-50 gloss meter), with your usual detergent, wet or even dry.
Advantages of the 3M purple diamond disc
The active side is the darker side including synthetic diamonds to simultaneously clean and shine the floor.
Mixture of specific fibers for cleaning and enhancing the shine of floors.
Open-structure tablecloth to collect dirt from the floor and facilitate maintenance.
Very resistant.
Increases the shine of the ground, in wet allowing to reach 40-60 points of shine (at 60 ° with the shine meter) on the marble and Terrazzo.
Boosts dry shine, on most floors, up to 80 shine points (at 60 ° per shine meter)
Very durable disc provided regular maintenance of the disc.
Durability: approx. 20,000m² in a scrubber
Thickness: 28mm
Bore: pre-cut to 85mm.
Characteristics
Native country
THin THAILAND
Reference
12186
Brand
3M
See other products by this brand
Sales unit
5 units By Cardboard
Barcode:
53134375479511
Weight (3)
1,28 Kg (3)
Manufacturer Warranty
NON CONCERNE
Similar products
See product similar to :
3M Scotch Brite disc crystallization Mauve 432 mm package 5
Size of the package (4)
Length : 44,60cmWidth : 44,60cmHeight : 15,00cm
Quantity available (2)
2 Cardboard
Customs Code
6805300090
UN code
No recommendation
Manual
Maintenance of marble floors in auto washer:
If the floor is damaged, it is recommended to first use Scotch-Brite ™ Sienna, SPP or Trizact ™ TZ to clean and prepare the surface for 1 week or 7 passes.
3M ™ Scotch-Brite ™ Mauve Disc is used as follows:
1. Install a clean Scotch-Brite ™ Mauve disc under the machine drive plate, dark side in contact with the ground.
Clean and polish the floor in a car washer with water or a neutral detergent.
After a few days (about 1 week) or 7-10 passes, the shine reaches its maximum level. Following initial processing, an additional 7 days (or 7-10 passes) may be required for additional shine.
To maintain this shine and clean the floor, use the Scotch-Brite ™ Mauve or Almond pad.

Maintenance of marble floors in monobrush:
If the floor is damaged, it is recommended to first use Scotch-Brite ™ Sienna, SPP or Trizact ™ TZ to clean and prepare the surface (8 passes are recommended).
The Scotch-Brite ™ Mauve disc is used as follows:
1. Remove debris and dust.
2. Install a clean purple disc under the machine drive plate, dark side in contact with the ground.
3. Clean and polish the floor with water or a neutral detergent (10-12 passes recommended).
4. Vacuum dirty water and remaining residue. Rinse with water by washing flat and allow to dry before reopening the area to traffic.
If you want extreme shine, add the points below:
5. Use the Dry Mauve disc at ultra high speed until the desired level of gloss is obtained (approximately 4 passes).
6. Maintain the floor with the Scotch-Brite ™ Purple or Orange Disc.
7. Raise the shine using the dry Scotch-Brite ™ Mauve disc.

Maintenance of thermoplastic floors with monobrush:
Do not use Scotch-Brite ™ Sienna Earth Disc on thermoplastic flooring.
Use the Scotch-Brite ™ Mauve pad to dry at ultra high speed preferably for the rise of gloss on a thermoplastic floor.
If the floor is damaged or protected, it is recommended to use the Scotch-Brite ™ SPP disc (4 passes) first.
The Scotch-Brite ™ Mauve disc is used as follows:
1. Make sure the floor is clean and free of dust.
2. Install a clean purple disc under the machine drive plate, dark side in contact with the ground.
3. Dry buff the floor to the desired level of gloss (4 passes recommended at ultra high dry speed).
complementary products
notice
5/5
1 reviews
  • 07/12/2018

    Conforme à notre attente

  • (1) Percentage calculated on the recommended retail price and / or the generally observed price and / or price having been offered for at least 1 month on the site.
  • (2) Approximate quantity.
  • (3) Estimated gross weight of product including packaging, used to calculate delivery costs
  • (4) Dimensions of product including packaging, used to calculate delivery costs
  • (5) Estimated restock date.
  • (6) We are obliged to make an exception for large items which exceed carriers' standard specifications. Some very heavy or large products require specific non-mechanizable transport treatment, and cannot be treated as standard deliveries. e.g. a retractable pole or similar long, fragile product requiring special care. In such cases, charges for 'special deliveries' and carriers concerned will be clearly indicated in the associated product information.