Floor polishing
The floor polishing operation is carried out on clean and waxed floors.
Therefore, it is necessary to first wet sweep the surface with
impregnated gauze .
At the end, use a white or beige colored disc.
This polishing is carried out at a rotation speed of between 150 rpm to 500 rpm, preferably with a
single brush .
This operation can possibly be carried out for large surfaces in a
scrubber dryer equipped with a disc holder plate.
A product can be used as a spray rather composed of a neutral cleaning formula, but can also be used dry.
This operation will restore a shine and “wet look” effect to your floor (floor protected by an emulsion or factory metallized).
How to keep your floors shiny?
How to keep the shine of your floors after the cleaning operation, discover the range of 3M Scotch-Brite discs designed for frequent maintenance operations in order to restore the shine of your floors and remove surface marks. Choose them according to your machine speed and your emulsion.
The main colors of discs, notably in the 3M Scotch Brite range for polishing, are divided into two categories. The 500 rpm buffing discs then the discs intended for
high speed buffing .
3M Scotch-Brite Polishing Disc White Abrasive disc for dry polishing of protected floors. The white disc is a high-speed, non-aggressive polishing disc designed for protected floors. Single brush up to 500 rpm