Disk clean and shine 3M 305mm by 5

The Scotch-Brite Clean and Shine Pad is a two-in-one floor cleaning pad: it cleans and shines floors in a single step. Made of contrasting polyester fibers, the Scotch-Brite Clean and Shine Pad provides a clear wear indicator. Designed for everyday cleaning or light scrubbing, it can be placed under a floor scrubber or other standard low-speed floor cleaning equipment using water or a neutral detergent. This pad cleans and shines in one step, using only a simple low-speed floor scrubber. With continued use, the Clean and Shine Pad makes your floors even shinier and can even reduce or eliminate the need for buffing.

Advantages of clean and shine disc 305 mm 3M Scotch Brite

- Exceptional cleaning, no more streaks and brilliant shine (brightness and/or image reflection) and only with water.
- Both sides of the disc can be used, for easy and prolonged use.
- Compatible with water, neutral detergent or cleaners normally used for floor cleaning.

Where to use this product:

This product can be used on most floors, protected or not, such as vinyl, PVC, rubber, ceramic, marble, terrazzo, granite and concrete.

Features:

- Fiber types: polyester
- Weight: 1420g/m2 nominal
- Nominal thickness 25mm
- Pre-cut bore at 85mm
- Marking: "Scotch-Brite Clean and Shine pad" on one side of the disc
- Box of 5 discs.

1) Sweep the floor before cleaning.
2) Install the appropriate Clean and Shine disk under your machine.
3) If you are using a single-disc machine, a center mount may be necessary.
4) Fill the tank of the device with water or a well-diluted detergent solution.
5) Clean the floor.
6) Disks should be rinsed with water to remove dirt and debris when necessary, to prolong its effectiveness.