Taski Jontec restore f3g spray method 5 L

Taski Jontec Restore is a professional Taski Diversey product that is used in spray method. Jontec Restore by Johnson Diversey is available in 5 liter containers. Jontec restore is used in spray high maintenance method of maintenance.
Can be used in high-speed or low-speed mono-brazing.
Detergent / high gloss cleaner, for use on protected or unprotected floors. Can be used with a low, high or very high speed monobrush (165 to 1200 rpm).
Ideal in combination with the TASKI omni system.

Main Properties

• Perfect combination of high-quality polymers, waxes and solvents
• Leaves a light protective film
• For use with low, high and very high speed monobrazers
• Versatile application

Advantages

• Effectively cleans and maintains hard floors in one step
• Renovates emulsion films; Reinforces the shine of the soil
• Dries very quickly, so it does not interrupt traffic on the area
• Can be used directly on most unprotected coatings with a single-speed all-purpose machine to facilitate cleaning and protect the floor

Application :

TASKI Jontec Restore is ready for use. Dust off the floor, shake the container thoroughly before use, fill the sprayer or a single-disc machine equipped with a red disc (eg TASKI ergodisc omni or TASKI ergodisc duo).
Evenly spray a fine mist; Treat about 2m ² with the monobrosse. Repeat the operation over the entire workpiece. At the end of the operation, perform a wet sweep with a little impregnated gauze.
The product is also suitable for spray glazing with a low, high and very high speed single spindle (165 to 1200 rpm).
Tip: For best results, it is best to spray the product in small quantities and repeat the operation.
Important:

Do not store below + 6 ° C.
As soon as the disc begins to dirty the surface (in case of extreme dirt
On a large surface), turn the disc or replace it with a clean disc.
Cleaning the disc: Soak the dirty disc overnight in a 2% stripping solution (eg TASKI Jontec Futur). Then rinse thoroughly and allow to dry.

Handling: Full recommendations for product handling and disposal precautions are available on the Material Safety Data Sheet, available on the Internet at www.diese-fds.com.
For professional use only.

Full text of the H and EUH phrases mentioned in section 3:
• H225 - Highly flammable liquid and vapor.
• H226 - Flammable liquid and vapor.
• H228 - Flammable solid.
• H290 - May be corrosive to metals.
• H301 - Toxic if swallowed.
• H302 - Harmful if swallowed.
• H304 - May be fatal if swallowed and enters airways.
• H311 - Toxic in contact with skin.
• H312 - Harmful in contact with skin.
• H314 - Causes severe skin burns and eye damage.
• H315 - Causes skin irritation.
• H317 - May cause an allergic skin reaction.
• H318 - Causes serious eye damage.
• H319 - Causes serious eye irritation.
• H320 - Causes eye irritation.
• H330 - Fatal by inhalation.
• H331 - Toxic by inhalation.
• H332 - Harmful by inhalation.
• H335 - May irritate the respiratory tract.
• H336 - May cause drowsiness or dizziness.
• H341 - Suspected of causing genetic defects.
• H351 - Suspected of causing cancer.
• H371 - May cause damage to organs.
• H400 - Very toxic to aquatic organisms.
• H410 - Very toxic to aquatic organisms, causes long-term adverse effects.
• H411 - Toxic to aquatic organisms, causes long-term adverse effects.
• H412 - Harmful to aquatic organisms, causes long-term adverse effects.
• EUH066 - Repeated exposure may cause skin dryness or cracking.