Taski Jontec Matt wax finish matt 5L

Taski Jontec Matt from diversey is the evolution of Taski vision matt alcohol-resistant matte floor emulsion. Floor emulsion, matt, non-slip, for hard floors such as vinyl (PVC), linoleum, rubber floors and natural or artificial soft stones.
Forms a durable and resistant film.
Resistant to alcohol-based surface disinfectants.
High resistance to puncture marks.
Forms a low gloss protective layer.

Main properties and advantages:

• Forms a durable and resistant film
• Excellent adhesion to most floor types
• Anti slippery according to international standards (ASTM D-2047)
• Resistant to alcohol-based surface disinfectants
• High resistance to puncture marks
• The formation of a resistant film protects the surface of the floor, even for high traffic areas, and facilitates daily cleaning
• Suitable for most floor types such as vinyl, plastic, linoleum, stone, and cork floors
• The appearance of the floor remains matt at the end of application and thus reinforces the reassuring image
• Anti-slip product for the safety of your employees and customers
• Matt and alcohol-resistant product, particularly suitable for use in hospitals

dosage:
Ready to use; Use pure
Application:
Apply only on thoroughly dry and thoroughly cleaned floors. TASKI Jontec Matt is ready for use. Mix well before use. Apply a thin coat of TASKI Jontec Matt with an emulsion applicator (TASKI clamp), or mop, in a strip of 1 to 1.5 meters wide, taking care to overlap them when they are still
wet. Allow to dry (about 30 minutes), apply the second layer and the following ones by crossing them. For optimum protection, 3 thin layers are recommended for porous floors, 2 layers are sufficient for smooth, non-porous floors.
Linoleum: Once the first coat is dry, use a single coat with a blue disc, then pass a damp fringe and allow to dry before
To apply the other layers.
Stripping and Protection:
Use a Diversey remover to remove the coat of varnish and vacuum the solution with a scrubber cleaner or water vacuum cleaner. Let dry
Completely and apply additional layer (s).

Important:
• Apply the product on thoroughly rinsed, thoroughly dried
• Do not dilute or mix with other products. Do not store or use at temperatures below 5 ° C.
• Do not use on raised floors, cork or untreated wood
• Request advice for use on non-slip rubber floors
• Do not use outdoors or on wet areas

Full text of the H and EUH phrases mentioned in section 3:
• H303 - May be harmful if swallowed