Parquet sealer Bona Traffic Mat 4.95 L

Traffic HD is a two-component, water-based polyurethane sealer.
While driving performance to an even higher level, Bona Traffic HD offers outstanding resistance to wear, scratches and chemicals, even after 24 hours of operation. By its excellence, Bona Traffic HD is the varnish of the future, intended for the floors subjected to an extremely intensive traffic, while combining an ultimate durability with a rate of VOC lower than 4%, for extraordinarily durable results.
Bona Traffic HD is a new two-component, water-based, 100% polyurethane varnish for surfaces with extreme wear standards. With a VOC content of less than 4%, Bona Traffic HD meets environmental standards, being DIBt certified. Using the latest advanced "polymer" technology, Bona Traffic HD has been developed for sustainable results, on parquet and the environment, with unmatched resistance to scratches, scuffs and household chemicals. Clear, non-yellowing formulation

Characteristics:
- Extreme durability and scratch resistance
- Faster hardening, possibility to treat a floor and reopen it to traffic the next day.
- Very low odor
- Low VOC content <5%
- DIBt certification for very low indoor emissions
- Suitable for survitrification of finished-factory parquet
- EN 14904: 2006 (sports floors)

Application:

Before applying the varnish, the surface must be pre-treated with a water-based Bona primer.
Check if the soil is acclimated to the ambient temperature of application.
The surface must be well sanded, dry and clean, free from sanding dust, oil, wax or other impurities.
Allow the varnish and the hardener to acclimatise at room temperature, fit the filter and shake the can well before use.
Best application conditions: temperature between 18-25 ° C and humidity of 40-60%.
High temperatures and low humidity will decrease the drying time; low temperatures and high humidity prolong the drying time.
Minimum operating temperature: 13 ° C.

1. Shake the Traffic HD can, open it, add hardener and close.
Immediately shake the can for 1 minute and insert the filter. If you do not need an entire can, pour the necessary amount of varnish into another can. 1 liter of varnish corresponds to one dose of hardener. 2 liters in two doses, etc ...
2. The mixture should be used within 4 hours of preparation.
3. Apply the varnish using a Bona roller for waterborne varnish, alternately in the direction of the wood and in the other direction, to avoid accumulation of the product. Always maintain a "wet edge" to avoid overlaps. Allow to dry before applying the next coat.
Consider a longer drying time for each additional layer.
4. If necessary, grind with a grating disc or Bona Scrad System, grain 150 (or finer) and remove sanding dust before applying the final coat. Note: If you have allowed the previous layer to dry for
Intermediate ginning should always be carried out at 24 hours.
8 hours after application of the last coat, it is possible to walk with caution on the treated parquet. It will take 1 day until the varnish is dry and reaches its maximum hardness. After 3 days, carpets and other furniture can be replaced, and if necessary, the floor can be cleaned with a special neutral detergent
Note: If Bona Traffic HD has been used in combination with Bona Create, a period of one week must be allowed before covering the surface treated (with carpet and furniture).