Bona classic primary parquet 5L

Bona Classic is a single component acrylic primer in aqueous phase to be applied before vitrification with a varnish Bona aqueous phase.
Bona Classic gives a well-stocked surface appearance and reduces the risk of side gluing.
For use with all Bona polishers in aqueous phase
Give a well-stocked surface appearance
Reduces the risk of side gluing, in particular for wooden floors on singing,
floors and floors laid on floor heating
High solids content
Without NMP or NEP
Approved by the DIBt for better indoor air quality
Preparation:
The surface to be treated should be well sanded, dry and clean, free from sanding dust, oil, wax or other fatty substance.
Use Bona Scrad system, or a single brush and an abrasive grain disk 120 or finer for the final sanding.

Manual:

Room temperature and that of the sealer should be above 13 ° C during application and drying.
Mix well before use.
Applying with a suitable roller, avoiding the accumulation of product and puddling. Work "wet on wet" to avoid connections.
Allow to dry and then apply 2-3 Bona finishing vitrifying layers.
Note: Due to its elasticity, Bona Classic is very difficult to shatter. Complete ginning after applying the first layer of topcoat.