JohnsonDiversey Jontec Luna satin floor wax emulsion modern floor 5 L

Taski Jontec Luna replaces Taski vision silk is a satin-effect emulsion wax allowing a low level of maintenance for all types of washable floors (PVC, linoleum, vinyl, thermoplastic ...). The clear film helps maintain the natural look of your floors.

Main properties

• Protective satin effect layer
• Durable, wear-resistant protection
• Perfect adhesion for most soils
• Easy to apply and maintain: dries quickly
• Anti-slip aptitude tested according to the James method reference system
(ASTM D-2047)

Benefits

• Respects the natural shine of floors through its satin effect
• High resistance to punch marks even with heavy traffic
• Good UV resistance
• Can be applied with a mop or emulsion applicator
• Guaranteed security for your staff and customers

Technical data
Appearance: opaque liquid, white
Relative density (20C): 1.023 to 1.033
Pure pH (20 ° C): 8.4 to 9.2
Consumption: 30 to 40 m² / L
The above data is typical of normal production and should not be considered
as specifications.
Recommendations for handling and storage
Handling: the complete recommendations relating to the precautions for handling and disposal of the product are available on the Safety Data Sheet, accessible on the Internet: www.diese-fds.com.
For professional use only.
Storage: keep in its original packaging, closed, away from extreme temperatures (temperature
above + 5 ° C).

Reservation on shipping and order processing on this reference
We therefore reserve the right to refuse any order for this product where shipping would appear to us impossible with regard to safety standards and the content of the order.
If the product is ordered alone it will not be delivered.
The product must be part of a minimum overall order or at least be ordered in a full box of 2 cans.

Full text of the H and EUH phrases mentioned in section 3:
• H302 - Harmful if swallowed.
• H303 - May be harmful if swallowed.
• H315 - Causes skin irritation.
• H317 - May cause an allergic skin reaction.
• H318 - Causes serious eye damage.
• H330 - Fatal by inhalation.
• H400 - Very toxic to aquatic organisms

Dosage:
Ready to use. Apply pure.
Application :
Carefully strip the old protective layers. Treat stripped, rinsed and completely dry floors. For highly porous floors, it is preferable to apply a pore sealer from the TASKI Jontec range (eg TASKI Jontec Technique) beforehand. TASKI Jontec Luna is ready to use.
Evenly apply a thin layer of TASKI Jontec Luna using a mop or emulsion applicator. Allow to dry well (about 30 minutes).
Apply the second coat and the following ones, taking care to cross them (3 coats are recommended).
Maintenance system:
Dust the floor daily. Regularly wash the floor with a neutral detergent from the TASKI Jontec range. When necessary, remove the marks present on the film by polishing, using a low speed single-disc machine fitted with a red disc.