Porous floor impregnation Taski jontec repello 5L

Taski jontec repello from Diversey is a water-based impregnation product for the protection of porous stone and ceramic floors, for indoor treatment.

Main properties
• Water-based formula, odorless
• Effectively impregnates porous stones and ceramics
• Maintains the natural look of the floor
• Easy to apply, does not require special equipment

Advantages

• Protects the floor while maintaining its original appearance
• Prevents the penetration of water and grease, delays the penetration of stains, while letting the floor breathe
• Makes cleaning easier

Dosage:
Ready to use. Use pure.
Product consumption depends on the porosity of the soil. This consumption can vary significantly. Check the porosity of the soil beforehand with water to adapt the product consumption. On average, the floor will consume 10 to 40 ml/m² per layer of product (1 L of product for 25 to 100 m²).
Application :
Treat only perfectly clean and dry floors. Shake the can before use. On surfaces of 2 to 3 m², pour TASKI Jontec Repello on the floor evenly using a clean mop, an emulsion applicator or a monobrush (<200 rpm) equipped with a red disc, in order to completely wet the surface. Leave the floor wet for 3 to 5 minutes without letting the product dry (add solution if necessary). Only remove excess product if necessary. Repeat if necessary after 1 to 3 hour(s) when floor is dry to the touch.
Important :
On very porous floors, product absorption is very rapid. To avoid overconsumption, do not let the product absorb too quickly by spreading it quickly over the entire surface. Passing a clean, dry mop over the surface facilitates the penetration and removal of excess product and reduces the drying time of the product.
In rare cases (dark polished stones), white traces corresponding to an excess of product may
be visible on the ground. In this case, remove the product using a clean cloth or a squeegee. If the floor is dry, add a little product to dissolve the traces then remove the solution and dry by rubbing with a dry cloth or a squeegee.
Floor may be slippery before floor is completely dry and excess product is removed.
Once the floor is dry, the treatment does not modify the slipperiness of the floor.
TASKI Jontec Repello is ideal for very porous stones.
Recommendations for handling and storage
Handling: the complete recommendations relating to the precautions for handling and eliminating the product are available on the Safety Data Sheet, accessible on the Internet: www.diese-fds.com.
Only for professional use.
Storage: keep in its original packaging, closed, away from extreme temperatures. Fear the frost.