High-speed monobrush

A high-speed or very high-speed single-brush machine is designed for polishing . For 45 years, Voussert has been a specialist in single-brush machines , particularly high-speed machines, through brands recognized by cleaning companies, communities, and professionals such as Taski, Numatic, and Nilfisk. Voussert will help you compare and choose the best single-brush machine .
The high-speed single-brush machine differs from a traditional single-brush machine in that it is dedicated to only one mission : Regenerating the protective film (emulsion wax) of your plastic floors and giving them a "wet look" shine.

High-speed single-brush machine from 300 to 450 rpm

Machine whose rotation speed exceeds 300 rpm . We thus distinguish machines whose speed goes from 300 to 450 rpm. These materials are exclusively intended for use in polishing, buffing and spray method. We are therefore in the context of maintenance and renovation of the metallization layer which will have been applied beforehand. The economic objective is to absolutely avoid a stripping operation which is very heavy in time and consumption of products and water.
For this type of use, you will need to use red colored discs, preferably in the case of a spray method .
This type of machine is handled exactly like a low-speed machine , oscillating sideways from right to left, working by area. This work is done using a sprayer integrated into the machine or simply a hand-held sprayer to gradually spread the renovating and/or cleaning spray over the floor.
Under no circumstances should this type of equipment be used for stripping, cleaning or any other operation requiring high torque and suitable rotation speed.
This could indeed cause significant damage to equipment and surfaces.

Very high speed single-brush machine of more than 800 rpm

In this specific case, they are necessarily equipped with a wheel at the front of the machine in order to stabilize the single-brush machine . The machine can offer rotation speeds of up to 1500 rpm or even 2000 rpm like the Ergodisc 2000 single-brush machine.
In this case we are talking about an ultra high speed single-brush machine .

The handling of this type of machine will be done in linear advance and no longer in oscillating movement as is the case for low or high speed.
The suitable discs are very specific and each brand (notably 3M) offers suitable ultra high speed discs .
The effect of using this type of single-brush machine is to obtain a "Wet Look" effect or wet effect allowing to obtain reinforced protection due to the hardening effect as well as an incomparable shine.