It is necessary to distinguish the following different standards of hand towel rolls:
Hand towel roll Enmotion Lotus SCA
Please note there are two distributor standards at Lotus on Enmotion coils.
The
classic Enmotion contactless electronic dispensers references 90000 and 90001 accept coils references 471110 (ex reference 90225), 471116 (ex K90127) and 90226.
This system is now called
the H13 system at Essity Tork.
Enmotion Impulse contactless electronic distributors references 291000, 291001, 402996 accept Enmotion coils reference 471113 (Ex reference 403171).
This system is now called
the H12 system at Essity Tork. Tork Matic H1 intuition
The
Tork Matic H1 system distributor is the reference at SCA.
The dispensers are available in white or black manual autocut reference 551000 and 551008 or "intuition" contactless dispensers in white or black reference 551100 and 551108.
The associated consumables are references 290016, 290067, 290076 and 120069.
Series 3000 Lotus SCA
For older generations of Lotus Serie 3000 distributors, whatever the device in groove 3.5 or 7, the compatible Lotus product is reference 5893000.
NextTurn Lotus SCA
For Lotus NextTurn distributors reference 5890000 and 5890010 there is only one compatible Lotus reference 5892290.
This system is now called
the H14 system at SCA. Hygenius roll hand towel from Lucart
Lucart Hygienus distributor reference 895982 / 892980 you must take the compatible coil reference 861126 or 861055 or 861059
Multi standard roll hand towel
If you have an autocut type roller device (the user pulls on the part of the hand towel which comes out at the bottom of the dispenser and the reel is automatically cut),
you must check the diameter of the internal mandrel which as a general rule is 60 mm as well as
the spool width (between the spool support arms).
References 89344, 89439 and 89343 are adaptable to most autocut distributors on the market (Steiner, Kimberly...etc).
The spacing of the arms which hold the coil is generally adjustable at the rear of the device (Steiner) to best adapt the coil.
If in doubt, do not hesitate to contact us.