Description
The DRF Ecocert non-rinse food disinfectant is a product intended for the non-rinse disinfection of surfaces and materials in or out of contact with foodstuffs for the food industries, restaurants, communities, nurseries, schools, etc.
Multi-surface usable in Organic Shelter. (In application of Regulation (EC) No. 834/2007)
Efficiency :
• Disinfects surfaces and equipment (weighing equipment, cutting tools, display cases, cold rooms, etc.).
• Respect for most surfaces (stainless steel, plastics, paints, resins). Not suitable for plastics sensitive to ethanol (PVAC, cellulose acetate, etc.). If in doubt, we recommend testing on a small, non-visible surface before use, particularly for phone screens, screens and touchscreen tablets.
• Quick drying without streaks.
• Product complies with the regulations relating to cleaning products for equipment and utensils that may come into contact with foodstuffs (decree of 12/19/2013 amending the decree of 09/08/1999).
Microbiological properties:
Microbiological properties: 20°C, PAE, dirty conditions¹ and clean conditions²:
Bactericidal P.aeruginosa, E. Hirae, S. aureus, E. coli: EN 1276 30 sec², EN 13697 2 min¹. Candida albicans yeasticide and fungicide
Aspergillus brasiliensis: EN 1650 30 sec², EN 13697 5 min¹. Virucidal activity with borderline spectrum (murine norovirus and adenovirus): EN
14476+A1 (2015) 1 min². Active against enveloped viruses (Vaccine Virus) such as Coronavirus, Hepatitis B virus,
Hepatitis C, HIV, influenza virus, etc. : EN 14476+A2 (2019) 1 min¹?².
Manual
It is advisable to carry out a test on the surface to be cleaned before use. The 5L can is used to refill the 750mL sprayer.
To reduce the environmental impact, respect the recommended doses of use.
Use for disinfection on previously cleaned surfaces:
- Spray DRF so as to cover the surface to be treated well and in particular in corners and hard-to-reach surfaces (6ml/m² = 2 to 3 pressures).
- Leave to act for 30 seconds (1 minute for activity on viruses). Wipe with a clean non-woven cloth if necessary. Does not require rinsing.
- Discard the soiled support.
Use for cleaning and disinfection:
- Spray DRF so as to cover the surface to be treated well and in particular in corners and hard-to-reach surfaces (6ml/m² = 2 to 3 pressures).
-Leave it to act for 2 to 5 minutes. Clean using a clean non-woven fabric. Does not require rinsing.
- Discard the soiled support.