Description
The no-rinse disinfectant spray for surfaces and materials in contact or not with foodstuffs for the food industry, restaurants, communities, nurseries, schools, etc.
Bactericidal - Levuricidal - Fungalicidal. Limited spectrum virucidal activity.
Detergent, disinfectant without rinsing multi surface usable in Organic Farming: In application of regulation (EC) n° 834/2007.
Efficiency :
- Disinfects surfaces and equipment (weighing equipment, cutting tools, display cases, cold rooms, etc.).
- Respect for most surfaces (stainless steel, plastics, paints, resins). Not suitable for plastics sensitive to ethanol (PVAC, cellulose acetate, ...).
- Fast drying without streaks.
- Product complies with the regulations relating to cleaning products for equipment and utensils that may come into contact
foodstuffs (order of 19/12/2013 modifying the order of 08/09/1999).
Microbiological properties:
20°C, PAE, dirt conditions¹ and clean conditions²:
Bactericidal P.aeruginosa, E. Hirae, S. aureus, E. coli: EN 1276 30 sec², EN 13697 2 min¹.
Candida albicans yeasticide and Aspergillus brasiliensis fungicide: EN 1650 30 sec², EN 13697 5 min¹.
Limit spectrum virucidal activity (Murine Norovirus and Adenovirus): EN 14476+A1 (2015) 1 min².
Active against enveloped viruses (Vaccine Virus) such as Coronavirus, Hepatitis B virus, Hepatitis C virus, HIV, influenza virus, etc. : EN 14476+A2 (2019) 1 min¹?².
Composition :
Ready to use liquid containing: >30% ethanol, 1-5% denaturant, 15-30% water. 98.5% of the ingredients are of natural origin. Liquid biocidal product TP2 and TP4 ready to use. Active biocidal substance: Ethanol (CAS 64-17-5) 66.5%.
Features :
Appearance: fluid liquid
Color: colorless
Odor: characteristic
Density: 0.87 - 0.88
pH: 6 - 8
Foam spray 750ml
Manual
It is advisable to do a test on the surface to be cleaned before use. The 5L container is used to recharge
the 750mL sprayer.
To reduce the environmental impact, respect the recommended doses of use.
Use for disinfection on previously cleaned surfaces:
1) Spray DRF so as to cover the surface to be treated well and in particular in the corners and surfaces difficult to access (6ml/m² = 2 to 3 pressures).
2) Leave to act for 30 seconds (1 minute for activity on viruses). Wipe with a clean non-woven if necessary. Requires no rinsing.
3) Discard the soiled support.
Use for cleaning and disinfection:
1) Spray DRF so as to cover the surface to be treated well and in particular in the corners and surfaces difficult to access (6ml/m² = 2 to 3 pressures).
2) Leave to act for 2 to 5 minutes. Clean with a clean non-woven. Requires no rinsing.
3) Discard the soiled support.