Use
Grasp the handle of the hairdryer, activate the power switch located on the wall unit, then press
Press the button on the handle to obtain a flow of hot air. The device stops as soon as the button is released.
Functioning
1. Take the handle: hot air comes out of it.
2. The air speed and temperature can be adjusted via the control switch.
3. This device has dual overheat protection: it shuts off when the temperature inside
The device becomes too high.
Installation and usage precautions
- This appliance must be installed on a fixed and stable wall, free from vibrations. It must not be installed on an unstable wall or directly above a bathtub, to avoid any risk of falling; nor should it be installed on a wall covered with flammable decorative materials.
- Do not install in a room with corrosive air or charged with electrical dust.
- Keep away from water, like any electrical appliance.
- It is forbidden to obstruct the blower's air outlet. Ensure that the towel does not obstruct the air outlet.
- It is forbidden to direct the flow of hot air directly towards the eyes. Keep children away from the device , especially to prevent them from using it as a toy, which is extremely dangerous.
- It is forbidden to spray water directly onto this device.
- Turn off the power when the device is not in use for a long period of time.
- If the power cord is damaged, it must be replaced by the manufacturer, its after-sales service or a qualified person, in order to avoid any danger.
- This device is not intended for use by persons (including children) whose abilities
Users of this appliance are not permitted to operate it under the supervision of a person responsible for their safety, but they may be given supervision or instruction concerning its use by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
the device.