Compact hotel hair dryer

If you're looking for a compact and space-saving device, this product will fit perfectly in a hotel room, guesthouse, or other public establishment. It can also be used in sports facilities or communal areas near showers to offer users a simple and reliable hair-drying solution.
Its small size makes it discreet and it can be easily installed.
It is designed for easy use with a simple grip.
Pressing the grip button activates hot air operation, which will stop as soon as the pressure is released.
Fixing the wall bracket to a partition or wall.
Option to choose hot or cold temperature setting and to adjust the speed to two settings to adapt the drying process.
Excellent value for money for this hair dryer intended for collective or hotel use.

Features of the 1200 watt compact hair dryer

Made of white ABS
Spiral electrical cable, maximum length 120 cm
2 speed settings
2 temperature settings (ON/OFF)
Power 1200 watts
Power supply voltage 230 Volts
Frequency 50/60 Hz
Class II appliance
IP Category = IPX1
Designed for up to 120 daily crossings
Temperature in hot setting: 61°C measured at 10 cm
Safety thermostat (maximum drying temperature)
Noise level 60 dB measured at a distance of 2 meters
Safety by manual start-up at the handle
CE and RoHS certified.

The device must be placed on a solid partition or wall.
It cannot be mounted on the wall sensitive to shock or vibration or just above the bathtub to avoid falling, nor can it be mounted on the wall with flammable decoration material.
2. Do not install in the room with humid air.
3. Keep away from water and electrical liquid.
4. Blocking the fan is prohibited. Keep the bath towel away from the fan to avoid blocking it.
5. It is forbidden to blow hot air directly into the eyes. It is recommended to prevent children from using it, especially from playing with it as a toy, which is extremely dangerous.
6. It is forbidden to spray water directly onto this device.
7. Turn off the power when not in use for a long time.
8. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
9. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety; children should be supervised to ensure that they do not play with the appliance.

Installation must be done with anchors suitable for the partition material to avoid any tearing.
The installation height is recommended at 1.5 m.
The device being IPX1 it must be installed outside volume 2. ( See electrical installation instructions )