Disinfectant for climagerm air conditioner 5L

Climagerm 3D is a detergent, disinfectant and deodorant for air conditioners. The climagerm 3D disinfectant allows flawless hygiene without rinsing. The product is ready to use. This product is suitable for filters and containers. Climagerm 3D applies: housings of indoor units, chutes, condensers and evaporators.
The disinfectant is ultra versatile, without phosphates, without chlorinated solvents and very persistent.

Characteristics:

Appearance: Clear liquid
Color: light yellow
Relative density: 1 +/- 0.01 g / cm3
Solubility (Water): very soluble
Available fragrance: Verbena.
Contains among other components: Disinfectants, perfumes, D-LIMONENE, citral.

BACTERICIDE
Pure product, 5 min, EN 1276 (Dirt condition): Pseudomonas aeruginosa; Staphylococcus aureus; Enterococcus hirae; Escherichia coli.

LEVURICIDE
Pure product, 30 min, EN 13697 (Dirt condition): Candida Albicans

FUNGICIDE
Pure product, 15 min, EN 1650 (Cleanliness condition): Candida Albicans; Aspergillus Niger

VIRUCID
Pure product, 15 min, EN 14476 (soiled condition): Enveloped viruses MVA (coronavirus)

Biocidal active substance TP4 and TP2: Biocidal active substances: Didecyldimethylammonium chloride Cas n ° 7173-51-5: 0.0875% (m / m) and 2-Propanol Case n ° 67-63-0: 0.16% ( m / m).
TP2. Disinfectants and algaecides not intended for direct application to humans or animals.
TP4. Surfaces in contact with food and feed.

Pure use - 15 min. Without rinsing
- PRE-FILTERS / FILTERS: Remove dust from the filters using a vacuum cleaner or a soft brush. Apply by spraying directly on the surface to be treated.
- CONDENSATION TANK: Dry the tank with absorbent paper. Apply by spraying directly on the surface to be treated
- AIR RETURN TURBINE: Remove any dust present using a vacuum cleaner or a soft brush. Apply by spraying in the air intake area.

Use the product pure, without dilution. Remove all waste and residue from the surface to be cleaned.
1- Spray about 20 cm away, directly on the surface to be cleaned (one spray = 1 ml).
2- Leave to act for at least 5 minutes. according to the desired disinfection spectrum.
3- Wipe with a dry and clean cloth or a microfiber cloth if necessary.

Dangerous - Respect the precautions for use - Strictly professional use.
Before use, read the label and product information.
Use biocides carefully.