Thermostatic mixer central supply

Thermostatic mixer central feed is a thermostatic regulator that ensures the distribution of mixed water at constant temperature:
Depending on the chosen temperature
Whatever the pressure, flow or temperature variations of the installation in operation.

Description:

Thermostatic hot water regulator for mixed water supply.
Adjustable temperature from 30 ° C to 50 ° C.
Device set at 38 ° C at the factory locked by an anti-rotation cap system
Change of the setting by the user.
Admissible temperature 100 ° C
Anti-scald safety and accuracy of ± 1.5 ° C. between 34 and 40 ° C.
Network pressure up to 16 bar
Minimum operating flow: 5l / min.
Built-in check valves.

Operation:

HWCW-Mix attaches upstream of any faucet requiring a mixed water supply:
• Temperature stability
Operator Safety for Operators - Corrects temperature fluctuations. Maximum temperature limitation adjustable and lockable
• Anti-burn safety Automatic
Ensures the closure of the hot water supply, in case of failure of cold water supply.
• Prevention and permanent anti-legioneliosis soltuion.

In parallel with maintaining the DHW at a temperature above 50 ° C at all points in the network, thermostatic mixing valves must be installed as close as possible to the distribution points.
HWCW-Mix is a thermostatic regulator which ensures the distribution of mixed water at constant temperature:
Depending on the chosen temperature
Whatever the pressure, flow or temperature variations of the system in operation
use
In communities or domestic use
Central Hygiene - Centralized Cleaning System - CIP
Washbasin, Shower, Bathtub
Or any other use requiring constant temperature water