Taski jontec linosafe F1g linoleum floor stripper 5L

Ideal for old and fragile soils because its solvent-based formulation and pH below 10 will respect your soils.
Taski Jontec Linosafe is a powerful solvent-based stripper for removing protective coatings from linoleum and other water-resistant hard floors. Taski Jontec Linosafe is perfectly safe for removing the color from linoleum floors, even the oldest ones.

Properties of Taski Jontec Linosafe paint stripper

• Highly effective, slightly alkaline paint stripper
• Formulated to safely remove emulsions from linoleum floors
• Low foaming
• Acts quickly

Advantages of Taski Jontec Linosafe paint stripper

• Safe to use on all types of water-resistant hard floors, especially linoleum and limestone (such as marble floors)
• Easy and safe application
• Lightly scented for pleasant use
• Quickly and completely removes emulsion films

Technical data
Appearance: clear, yellow liquid
pH value (pure): ~9.95
pH value (in solution): ~9.8
Relative density (20°C): 1.03 g/cm³
The above data is characteristic of average production and should not be taken as specifications.

Sold in 5L containers

Dosage:
Dosage minimum: 2L for 10L of solution (20% / 1: 5).
Increase concentration to 50% for tough films
Application:
Doser TASKI Jontec Linosafe in a bucket / tank filled with water, apply the solution, leave to act for at least 5-10 minutes without allowing the solution to dry.
Next, brush the floor with a single disc equipped with a suitable disc, and aspirate the residual water. Rinse with clean water. Wait until the floor is completely dry before protecting it.
Use TASKI Jontec Linosafe diluted 5 to 10% to completely remove the film-forming protective layer from the new coatings.
Important:
We recommend removing the linoleum floor in small, progressive areas . Do not use on solvents sensitive to solvents (eg asphalt) and not resistant to water (eg unprotected wood). Quickly wipe out splashes on wood and painted surfaces with a damp cloth.
Test the compatibility of the materials before use.
Handling and storage recommendations
Handling: Full recommendations for product handling and disposal precautions are available on the Material Safety Data Sheet, available at www.diese-fds.com.
For professional use only.
Storage: Store in its original container, closed, protected from extreme temperatures.
Legislation
Cleaning agent in accordance with EC Detergent Regulation 648/2004.

Full text of the H and EUH phrases mentioned in section 3:
• H302 - Harmful if swallowed.
• H312 - Harmful in contact with skin.
• H314 - Causes severe skin burns and eye damage.
• H319 - Causes serious eye irritation.
• H332 - Harmful by inhalation.
• H335 - May irritate the respiratory tract.
• H402 - Harmful to aquatic organisms.
• H412 - Harmful to aquatic organisms, causes long-term adverse effects