Tableware renovation

The renovation of professional tableware will depend on the material from which it is made.
Your process will also depend on what you want to have as an action.
It is necessary to distinguish soaking as being a pre-washing before machine washing of certain dishes or professional kitchen utensils, from the renovation which must be carried out from periodically to prevent deterioration of the condition of your dishes.
Indeed, over time and passages in a professional dishwasher machine, layers of starch, limestone are deposited (under the combined effect of water hardness and temperature), sometimes coffee stains , fruit or cooked fats , etc.

Dishwashing products

These products are in liquid form or in powder form to be diluted in a sink with hot water between 40 and 50°C.
This soaking operation consists of leaving the product to act for 10 to 30 minutes depending on the soiling of the dishes and the fragility of the materials.
Once the operation is complete, the dishes can be "rinsed" by passing your basket of dishes directly to the dishwasher.
This operation may have the purpose of carrying out a periodic renovation or a systematic operation before going through the dishwasher for dishes or utensils for which going through the dishwasher is not enough.
a specially dedicated renovation powder will have a more curative action than a dipping powder.
Silverware renovation
The special case of silverware which must be done with a specially dedicated product.
In general, the product is used pure in a stocking and the soaking is very short, around 30 to 60 seconds.
Extending this time may cause the silverware to darken.