Accurately measure four different products in your sprayers and bottles with the PROMAX mini dilution unit. It's used to dilute detergents using a Venturi system. Flow rate: 4 liters/minute. Lever control.
The advantage of this system is the water/chemical mixture which creates a ready-to-use product.
Promax is an automatic dilution system that requires no electrical power ; suction is created by the force of the water supply. Promax is primarily used for diluting concentrated products suitable for cleaning and disinfecting floors and surfaces. The most common applications and models
The products used in these applications may include:
Odor elimination systems, window and multi-surface detergents, degreasers, concentrated detergents, foaming products for deep cleaning, sanitizing agents, ammonia, deodorizing detergents, floor and multi-surface detergents, multi-surface degreasers…etc.
Technical specifications:
Water supply connection possible from the right or left
Fitting type ¾” Female GHT
Disconnection type: Interval F (Flexible Membrane) Interval A (Physical, visible interval)
Venturi flow rates: 1 GPM (4 lt/m) (grey), 4 GPM (16 lt/m) (yellow), 8 GPM (30 lt/m) (blue)
Actuation Systems Buttons
Number of product entries: 4 products
Operating pressure: Min 15 PSI (1 bar), Max 130 PSI (9 bar), Ideal: 30 - 60 PSI (2 – 4 bar)
Max Temperature 160°F (70°C)
Note: Modules can be added after installation.
Package contents:
- Distributer
- Suction tube - 13ft (4 m)
- 6.5ft (2m) discharge hose for 14-30lt/min (4-8 GPM) or "S" shaped discharge hose for 4lt/min (1 GPM) filling of the spray bottle
- Hose suspension (only for 6.5ft hoses)
- Complete installation kit:
o Plastic clips (4 pieces)
o Calibration nozzles (4 sachets)
o Suction strainer and non-return valve (4 pieces)
o Ceramic weights (4 pieces)
o Fixings (3 pieces)
o Screws (3 pieces)
o Washers (3 pieces)
o Connector (for connecting two or more units)
o GHT fitting ¾” male - GHT fitting ¾” male
o Adhesive labels for container identification (4 sets)
o Adhesive labels for product identification (4 sets)
Which dilution system should I choose?
| Model | Number of products | Speed | Activation |
| PX B 1 F04 | 1 | 4 L/min. | Button for filling bottle, sprayer or bucket |
| PX B 1 F16 | 14 L/min. |
| PX B 1 F30 | 30 L/min. | Button for filling sink or floor scrubber |
| PX S 1 F04 | 4 L/min . | Slide to fill bottle, sprayer or bucket |
| PX B 4 F04 | 4 | 4 L/min . | Button for filling bottle, sprayer or bucket |
| PX B 4 F16 | 14 L/min |
| PX B 4 F30 | 30 L/min | Button for filling sink or floor scrubber |
| PX B 4 F04 | 4 L/min | Slide to fill bottle or sprayer |