Numatic Vacuum class H bi HZDQ 900-2 engines 40 liters

Numatic class H industrial vacuum cleaner for class H dust (EN 60335-2-69): carcinogenic, loaded with pathogenic agents (TLV <0.1mg / m³).
TRITEX primary filter reinforced by a pre-motor filtration cartridge according to class H (EN 60335-2-69) = 99.995% by mass.
Epoxy and polypropylene steel: strength and lightness.
Filter and bag saturation warning light, secure closing hooks, sealing plug with chain, manual with filter change operating mode ...

Each device is provided with an individual Sodium Chloride Test Certificate (EN60335-2-69).

Characteristics

2400 W motor
Supply voltage 230V AC 50/60 Hz
Air volume 80L / Sec.
Depression 2500mm / CE
Cable 10m
Useful capacity 40L
Weight 27.2 kg
Dimensions 800x490x880 mm

Standard accessories

602102 Flexible Ø38 mm long 2.4m
602161 Round brush Ø152mm mouthpiece 38mm
602923 Beveled scraper stainless long.280mm
602160 Flat suction nozzle Long. 305mm
602157 Round brush 65mm with adapter
629445 Roll of 10 garbage bags 120L
604019 Set of 10 filters Hepaflo 40L
Filter included
604116 "PERMATEX" primary filter tank Ø356mm
604125 Filter Cartridge for Twin Engine

Optional accessories

236143 Cable 3x1,5mm long. 10m NUPLUG

Areas of use

Pharmaceutical / Hospital Industry
Food
Asbestos

Devices intended for the collection of hazardous materials, or containing dangerous substances (asbestos, radioactive, toxic waste, etc.) must be the subject of a special decontamination procedure with a specialized body. This decontamination will be the responsibility of the customer, and will not give rise to any financial participation of Voussert or Numatic even during the warranty period.
It is understood that the maintenance (repair) of vacuum cleaners for the suction of dangerous dust (asbestos, wood, lead, silica ...) is the responsibility of the customer who has acquired it.
All these maintenance operations must be carried out in accordance with the NUMATIC INTERNATIONAL instruction manuals and in compliance with the laws in force inherent to this type of equipment, particularly with regard to the safety of persons (wearing PPE, APR ...)
In the event that the customer is not able to carry out the necessary maintenance operations (repair), he must then call upon a specialized and approved company in the decontamination of suction equipment intended for the collection of dangerous dust.
NUMATIC INTERNATIONAL SAS may transmit the details of a specialized and approved company to the customer concerned after written request by RAR mail of the latter.
Any return of vacuum cleaners intended for the extraction of dangerous dust (SAV and others) will have to be accompanied by a certificate of decontamination coming from a specialized company and approved in the decontamination of equipment of aspiration intended for the capture of dangerous dust.
All the operations of re-certification of the vacuum cleaners intended for the collection of dangerous dusts following an intervention SAV falls to the customer who acquired it.