Exeol floor can 5L

Exeol floor disinfectant detergent floor surfaces is intended for cleaning and disinfection of floors, surfaces and walls.
Use on all types of floors and surfaces by wet wiping.
- pH: 10.2 - 10.8.
- Cleaning action combined with disinfectant effect.
- Original synergistic association of three antimicrobial active ingredients (SCALE effect).
- Contains an easily biodegradable sequestering agent.
- Suitable for surfaces in contact with foodstuffs.
- Lemon scent
Biocidal liquid concentrate preparation TP2/TP4.

- Microbiological properties:
Dirt conditions, 20°C:
Bactericidal: EN 13727, EN 1276, EN 16615, EN 13697.
Yeasticide: EN 13624, EN 1650, EN 16615, EN 13697.
Mycobactericide: EN 14348.
Virucidal against enveloped viruses: EN 14476, EN 16777.
Active on Adenovirus, Norovirus and Poliovirus: EN 14476.

Respect the establishment’s hygiene plan.
Dilute the dose obtained in 8L of water at room temperature:
- 0.25% (2.5mL/L or 20mL) to 2% (20mL/L or 160mL) depending on the desired activity spectrum.
Repeat the disinfection operation whenever necessary.

Respect the establishment’s hygiene plan.
Preparation of the solution:
• 20mL dose:
Tear the dose using the pre-cut. Pour the number of doses required into 8L of water at room temperature: from 0.25% (2.5mL/L or 20mL) to 2% (20mL/L or 160mL) depending on the desired activity spectrum.
• 1L measuring bottle:
Remove the cap and squeeze the sides of the bottle to obtain the desired dose. Dilute the dose obtained in 8L of water at room temperature: from 0.25% (2.5mL/L or 20mL) to 2% (20mL/L or 160mL) depending on the desired activity spectrum. Close the bottle after use.
• 5L container:
When using for the first time, remove the tamper-evident ring then unscrew the cap. Using a suitable dosing system, dilute the concentrate in 8L of water at room temperature: 0.25% (2.5mL/L or
20mL) to 2% (20mL/L or 160mL) depending on the desired activity spectrum.
Close the container after use.

The diluted and unused solution can be kept in a bucket for 72 hours.
Use :
Use on floors:
1. Treat floors by wet sweeping.
2. Contact time: from 5 min. (at 0.5%) or 15 min. (at 0.25%) depending on the desired activity spectrum.
3. Do not rinse. Let dry.
Use on surfaces and walls:
1. Treat surfaces with a cleaning support previously impregnated with the diluted solution.
2. Contact time: from 5 min. (at 0.5%) or 15 min. (at 0.25%) depending on the desired activity spectrum.
3. Do not rinse (except surfaces in contact with foodstuffs).
Let dry.
After use, rinse the equipment used to apply the product.
Repeat the disinfection operation whenever necessary.