Taski jontec ESD anti static floor wax 5L

Wax emulsion for conductive floors, suitable for antistatic floors. Helps maintain the conductivity properties of floors.
Taski Jontec ESD F2k W2446 is a high-gloss, conductive emulsion for protecting antistatic floors while preserving their original properties.
Anti-slip capability tested according to the James standard (ASTM D-2047).

Benefits of Taski Jontec ESD & Care Diversey Wax

• Conductive emulsion
• Leaves a protective layer on your floor and gives it a satin finish
• Antistatic properties approved by independent laboratories
• Slip resistance tested according to the James standard (ASTM D-2047)

• Protects and maintains while preserving the soil's conductivity properties
• Comprehensive protection and maintenance program
• Unique technology
• Reduction of electric shocks for people, customers, and equipment
• Neat and well-maintained floor appearance
• Meets the basic requirements of EN/IEC 61340-5-1:2016 / EN 61340-4-5 and EN/IEC 61340-5-1:2016 / IEC 61340-4-1

Technical specifications of Taski Jontec ESD

Appearance: opaque, white liquid
pH value (pure): ~9
Relative density (20°C): ˜ 1.03
The above data is characteristic of average production and should not be taken as specifications.

Logistics data
Sold in 5-liter containers
Box of 2 cans
Pallet of 64 boxes

Dosage:
Ready to use. Use undiluted.
Application :
Use on stripped and completely dry floors.
Apply the product using a mop or emulsion applicator to the surface to be protected.
Always apply 3 successive coats, respecting a drying period of at least 1 hour between each of them and after the last coat (the humidity level in the air can vary the drying time of the emulsion).
To maintain maximum antistatic properties and shine, treat floors every 3 months in high-traffic areas, and every 6 months in less frequented areas.
Maintenance: Always wait at least 48 hours after applying the last coat and before any cleaning. Remove dirt daily with a dry mop to ensure the emulsion's conductive effect, clean the surface, and restore the protective coating's shine.
It is recommended to use TASKI Jontec Destat for the maintenance of antistatic floors.
Polish the floor (single-disc machine 400 rpm, white disc) for extra shine (at most 1 time per week).
Reminder: The protective coating lasts approximately 6 months, depending on traffic intensity and adherence to maintenance instructions. We recommend renewing the surface protection every 6 months by first damp mopping, followed by stripping with a TASKI Jontec Destat (single-disc machine, red pad).