Spado bituminous tar is a benchmark product.
- Anti-rust, anti-acid, anti-humidity surface protection specially formulated for outdoor buried materials.
- Black viscous liquid. Apply with a roller, brush, squeegee or brush.
- Can be used on metals, concrete, brick, asbestos-cement, foundations, foundations ...
- Soluble in most organic solvents.
- Dries very slowly.
- Equipment cleaning with white spirit.
- Yield: 3 m2 per liter per layer on porous support or 4 m2 per liter per layer on smooth support.
Manual
1) Remove all traces of moss, rust or old paints.
2) Degrease the support using Spado Acid detergent for floors and roofs.
3) Apply bituminous tar on absolutely clean, dry and dust-free surfaces.
4) Treat your surfaces with pure bituminous tar, preferably in 2 layers.
5) Stretch the product 24 hours before application, in the event of cold.
6) Slow drying: 24 to 48 hours which may vary depending on the atmospheric conditions of temperature and humidity.
Technical characteristics
- Relative density: <1.
- Flash point: 58 ° C.
- Odor: Hydrocarbon
- EU limit value for this product category "i": 600 g / l (2007) / 500 g / l (2010).
- This product contains max 370 g / l VOC.
Precautions for use
Harmful to aquatic organisms, may cause long-term adverse effects in the environment. Repeated exposure may cause skin dryness and cracking. Keep out of reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. If swallowed: do not induce vomiting, seek medical advice immediately and show the container or label.
This product is sold individually in 20 liter can