Powerdry brushed stainless steel air pulse hand dryer

In small offices, shops, restaurants, or changing rooms where wall space is limited, installing a high-performance hand dryer is often a challenge. The Voussert Powerdry is designed precisely for these situations: with a wall footprint of only 160 × 153 mm and a height of 280 mm, its compact, rounded shape fits where standard models won't.

Advantages of the compact electric pulsed air hand dryer

Despite its compact size, it makes no compromises on performance. Its 245 km/h airflow dries hands in 10 to 15 seconds , a result comparable to larger, more traditional high-velocity air dryers. Activation is fully automatic: no contact with the device, no surfaces to contaminate between users. Its 1150 W power ensures consistent performance throughout the day.

Its AISI 304 brushed stainless steel cover resists corrosion and fingerprints, and can be cleaned with a simple wipe. The brushed stainless steel finish blends seamlessly into any environment, from contemporary restrooms to professional changing rooms.
Designed for up to 100 people passing through each day , it is ideally suited for small and medium traffic: offices, shops, restaurants, lounges, medical practices, nursing homes.

CE, RoHS and FCC certified. Integrated on/off switch. IPX1 protection. 2-year warranty.

Key points to remember

Powerdry, with its round and compact shape, will find its place in small bathrooms.
Compact automatic hand dryer with air pulse, brushed stainless steel.
The Powerdry automatic hand dryer is a compact range that easily adapts to all sanitary spaces.
Average passage: -100 people/day.
Air propelled at over 245km/h.
Noise level: 72 dB

Technical specifications of the compact Powerdry pulsed air dryer:

Brushed stainless steel hood AISI 304
Air outlet speed: 245 km/h
Power: 1150W
Drying time: 10 to 15 seconds
Automatic triggering
Noise level: 72 dB
Power supply voltage 220-240 V
On/off switch
Electrical protection Class I – IPX1
Certification: CE - RoHS – FCC Label
Dimensions: L x W x H 160 x 160 x 280
Available in black.

The Powerdry is mounted to the wall using a mounting plate supplied with the unit, along with screws, wall plugs, and tamper-proof screws. Installation requires drilling four 6 mm holes, inserting the wall plugs, and then screwing the plate into place. The unit then hangs onto the brackets on the plate and is secured with two tamper-proof screws to prevent unauthorized removal. The recommended installation height is between 108 and 150 cm, depending on the user's height, with a minimum clearance of 400 mm between the bottom of the unit and the floor. Allow 100 mm of lateral clearance to prevent water from splashing onto an adjacent wall or mirror. The unit requires a 220-240 V power supply with mandatory grounding.

To dry, slide the backs of your hands under the air blower with a back-and-forth motion, then turn your palms upwards—both hands simultaneously. The detection is active up to 15-20 cm. An automatic shut-off occurs after 45 seconds if your hands are not removed. For maintenance, clean the cover with a dry cloth and a neutral detergent; avoid any organic solvents, acids, or abrasive cleaners that could damage the stainless steel finish. Disconnect the power supply before any maintenance operation.