Personalized mask Barral Evolon 40 category 1

The Barral reusable washable mask is a mask for the general public within the meaning of the patronage Afnor Spec S76-001: 2020 -
Category 1 report 2020-04-07-026-1 of 05/19/2020
This device is neither a medical device within the meaning of EU regulation: 2017/745 (Surgical masks), nor personal protective equipment within the meaning of EU / 2016/245 (FFP2 type filtering masks).

Personalization:
You want to have a unique product for a sporting, festive, cultural event, Society ... etc. Barral French manufacturer now offers you to customize your mask from 1000 masks.
We can print in full color on the total surface of the mask or a logo with a white mask or a plain mask.
Manufacturing time between 4 and 6 weeks.
You must provide us with your graphic elements, a model will then be offered to you in the form of proof


Respects the standard of 5 washes minimum to claim the concept of washable.
Validated at 50 washes by IFTH tests report 2020-04-07-026-1 of 05/19/2020 (1)
Performance level:
- Material whose performance has been measured by IFTH laboratories after 50 washes (report 2020-04-07-026-1 dated 05/19/2020)
- filtration efficiency of 3 µm particles> 99.9%
- air permeability for a depression of 100 Pa> 103.3 Lm-2.s-1

Wash the masks separately (do not mix with the rest of the laundry) to avoid breaking the straps.
Washing strongly recommended in a separate laundry bag.
To be ordered separately, reference 8878064

This is a reduced cost per use compared to a disposable mask whose use is unique.
This mask is intended to reduce the risk factor for the transmission of infectious agents (Viruses, Flu, COVID-19, ...).
Wearing it makes it possible to constitute a protective barrier against a possible viral penetration into the mouth and nose area of its user or of a person located nearby.

Technical specificity of the mask:
- Evolon® EVO 40PK double layer textile
Microfilament fabrics 70% - Polyethylene Terephthalate and 30% Polyamide
- Polyethylene Terephthalate and 30% Polyamide
- Hydro related spunbond
- Fasteners: polyester

Mask for the general public Made in France under the patronage Afnor Spec S76-00, tested by the laboratories of the DGA, its permeability is 152L.m-².S-1 for a depression of 100Pa (standard> 96L.m-².S -1) and its filtration efficiency is 99.9% of the 3µm particles emitted (standard> 90%).

Field of use: This device is neither a medical device within the meaning of Regulation EU / 2017/745 (Surgical masks), nor a
personal protective equipment within the meaning of Regulation EU / 2016/425 (FFP2 type filtering masks).
The design of this mask was established by following the patronage recommendations of AFNOR SPEC S76-001 and tested on a wearer for 4 hours by us.
This mask is intended for the professional environment and is exclusively reserved for non-sanitary uses
It is intended to prevent the projection of droplets.

This individual mask is intended to be offered to professionals who have to meet a large number of people during
of their activities (cashiers, law enforcement officers).

This device is not intended for use by healthcare personnel in contact with patients.
Filtering masks of the FFP2 type and masks for medical (or surgical) use are intended to be used and reserved for healthcare personnel. The wearing time will be less and limited to 4 hours over a single day (equivalent to half a day).
The mask makes it possible to constitute a protective barrier against a possible viral penetration into the mouth and nose area of its user or of a person located nearby.
Its purpose is to protect this area against any contact with the hands.
Only limited protection is claimed.
It is recommended to clean the mask before use.
The barrier mask is dimensioned so as to correspond to the average morphology of the French population.

The desired efficiency parameter is the filtration capacity of the materials used for particles with a diameter of 3 microns emitted by the wearer.
This device is not intended for use by healthcare personnel in contact with patients.
Filtration efficiency greater than 90%.
Like any general public mask, the wearing time is limited to 4 hours.

Logistics
Retail packaging pocket sachet of 10 - Standard packaging

(1) The test validates the strength and ability of the filter media to retain all of its filtering and strength properties. It does not take into account the attachments of the masks (straps, elastics ...; etc)

Price per unit
Minimum production in printing 1000 masks.
Packaging in bag of 10 or in bulk on request

Implementation:
To be effective, barrier masks must be properly used. For this, it is recommended to:
1) Wash your hands with soap and water or rub with a hydro-alcoholic solution before putting on a mask
2) For reuse of mask, make sure that it has been washed beforehand
3) Locate the top of the mask and place the barrier mask on the face,
4) Hold the barrier mask and pass the elastics of the set of straps behind the ears, and lower the bottom of the barrier mask, ensuring that it covers the chin.
5) Once adjusted, do not touch the barrier mask with your hands. Each time the barrier mask is touched, the wearer must wash their hands with soap and water or apply friction with a hydro-alcoholic solution.

Withdrawal:
To avoid being contaminated when removing a barrier mask, it is recommended to:
a) remove the barrier mask by gripping the elastics of the set of flanges from behind without touching the front part of the barrier mask.
b) Place the mask in a specific container (plastic bag) clean in case it is stored in order to be washed later.
c) Wash your hands with soap and water or rub with a hydro-alcoholic solution. Clean the outside of the bag with a cleaning product.
Maintenance: the barrier mask must be washed at 60 ° C minimum, for 30 minutes, with a detergent
classic.
Fabric softener is not necessary.
Wash the masks separately (do not mix with the rest of the laundry) to avoid breaking the strips.
Washing highly recommended in a separate laundry net.
It must be dried in the open air, and can be ironed at moderate temperature (silk position).