Nilfisk Alto washing vehicles autoactive 10L

Bodywork in the morning, engine compartment at midday, chassis in the afternoon: in many workshops, it's the same person, not always a chemistry expert, who tackles these tasks with the same container. This concentrated universal alkaline cleaner is formulated for this type of use: foaming , it effectively removes grease , oil , soot , organic residues , mineral deposits , and road film from all alkali-resistant surfaces . It cleans the bodywork , engine , and chassis of cars , trucks , buses , and trains , as well as tractors , mowers , and industrial equipment during maintenance. It is designed for easy use by non-specialists , with simple dosages depending on the surface. Its concentrated formula remains effective even when diluted, making it economical . It contains anti-limescale agents that limit the formation of deposits, and its formulation facilitates water treatment in recycling systems . It is used in garages , car washes , bus depots , farms , industrial sites and technical services . Corrosive product : wearing gloves and safety glasses is mandatory.

Advantage of the Nilfisk Alto autoactive 10 L:

- Universal : body, engine and chassis with a single product
- Easy to use : designed for non-specialist users, with clear dosage instructions
- Broad spectrum : grease, oil, soot, organic residues, mineral deposits and road film
- Engine special : diluted to 50% in pre-spraying, it degreases engine blocks
- Anti-limescale agents : they limit the formation of limescale deposits
- Economical : the concentrated formula retains its effectiveness once diluted
- All vehicles : cars, trucks, buses, trains and agricultural equipment
- Water recycling : its formulation facilitates the treatment of wash water
- Versatile : high pressure, pre-spraying or manual cleaning

Technical specifications of the Nilfisk Alto autoactive 10 L:

- Form : concentrated, alkaline, and foaming liquid
- Capacity : 10 L container
- pH : 9.5 in a 1% solution
- Effective against : grease, oil, soot, proteins, mineral deposits, road residue
- Formula : with agents that inhibit limescale deposits
- Surfaces : alkali-resistant surfaces; car, truck, bus and train bodies, engines and chassis; tractors, mowers; industrial equipment
- High-pressure application : pre-mixed at a 1:10 ratio or neat in the detergent tank; applied concentration of 0.5 to 2%, 1% maximum on bodywork and painted surfaces
- Pre-spraying dosage : from 1:50 (2%) to 1:10 (10%) depending on the level of soiling; 1:1 (50%) for engine cleaning; rinse with a high-pressure cleaner before drying
- Dosage for manual cleaning : from 1:100 (1%) to 1:20 (5%), using a brush or sponge, while wearing gloves
- Precautions for use : do not use on hot painted surfaces; do not allow the detergent to dry on the surface; heavy soiling may require several applications
- Transport : UN 1760, corrosive liquid, class 8, packing group III
- Mandatory protection : gloves and safety glasses

Application :
• Pressure washers: Can be pre-mixed with water at 1:10 (10%) or poured “neat” into the machine's detergent tank. A good application concentration is between 0.5% and 2%.
On painted surfaces such as automotive bodies, limit the applied concentration to 1%
• Pre-spray: Depending on the type of dirt, pre-mix in concentrations between 1:10 (10%) and 1:50 (2%). Spray onto the surface to be cleaned and remove with a pressure washer before the detergent dries. Heavy soil may require more than one application. For engine cleaning, dilute 1:1 (50%) and apply to engine. Rinse with a high pressure washer.
• Hand cleaning: Use gloves to protect the skin and dilute between 1:20 (5%) and 1:100 (1%), then apply with a brush or sponge.
• Do not use on HOT painted surfaces. Do not allow detergent to dry on the cleaning surface!

Text of H-phrases mentioned in Section 3
H225 - Highly flammable liquid and vapour.
H302 - Harmful if swallowed.
H319 - Causes serious eye irritation.
H336 - May cause drowsiness or dizziness.
H351 - Suspected of causing cancer.