Does the Speedy 602526 holder come with a fringe and a handle?
No, this is the frame only, delivered bare. It must be combined with a 40cm tab fringe (ref. 602594, 600609, 602809 or 080275) and a compatible handle (max. diameter 23.5 mm).
What is the difference between this holder and the pocket holder (ref. 602527)?
The 602526 uses tab-style fringes, secured by two clips with retaining prongs on the sides of the holder. The 602527 uses pocket-style fringes, which are slipped in and held in place by magnetic clips across their entire width. The two systems are not interchangeable: you must choose the fringe that is compatible with the holder (references 602594, 600609, and 602809 are available in versions compatible with both pocket and tab styles, depending on the model purchased).
Is this support compatible with a jaw press wringer system?
Yes, it is compatible with both jaw press and flat press wringer systems. Ideally, it should be used with a Bibac 600215B type washing trolley or a complete washing trolley with a blue bucket and a red bucket.
How do I attach the fringe to the stand?
Simply unclip the central lock to fold the support, slide the tab to one side, aligning the locking tabs with the eyelets, close the side clip, repeat the operation on the other side, then lay the support flat on the ground to lock it (see the demonstration video on the product sheet).
Which handle should I choose for this stand?
A handle with a maximum diameter of 23.5 mm. Compatible references: 887684 (steel 140 cm), 887357 (dismountable 150 cm), 608708 (adjustable aluminium 1 m to 1.60 m) or 887083 (aluminum 1.40 m drilled).