Electric hot air hand dryer, grey

In spaces where comfort and discretion are more important than speed, such as quiet offices, meeting rooms, medical practices, shared residential spaces, and hotels, a high-speed jet air hand dryer can be too noisy and intrusive. This wall-mounted warm air hand dryer offers a compelling alternative: gentle, quiet, and pleasant drying in just 10 to 15 seconds.
Therefore, silence is preferred, even though the drying time remains very efficient.
We manufacture this appliance in Asia, like the vast majority of electric hand dryers, with our long-standing partner . It is CE and RoHS certified and comes with a 2-year warranty at a special price for professionals and public institutions. This appliance is reliable, simple, quiet, and easy to install in areas where forced air is not suitable or cannot be installed due to noise.

Advantages of the quiet electric hot air hand dryer

Its asynchronous capacitor motor is at the heart of this difference. Unlike the brushed motors found in most compact jet air dryers, the asynchronous motor delivers significantly quieter operation and a considerably longer lifespan , with no wear parts to replace. The warm air produced is comfortable in all seasons and particularly appreciated in winter, when contact with cold or lukewarm air can be unpleasant.

The activation is fully automatic via contactless infrared detection , at a distance of 15 to 20 cm. Installation requires no electrician: four screws on a flat wall are sufficient, and the included 115 cm cord plugs directly into a standard outlet. A minimum height of 40 cm above the worktop must be maintained (more if there are reflective surfaces). The unit weighs 2.2 kg and its compact dimensions (238 × 170 × 268 mm) allow it to be integrated into most bathrooms without being visually obtrusive.

Available in a stylish silver-grey color, it adapts to all environments, from contemporary restrooms to minimalist workspaces.

IPX23 protection. CE certified. Double insulated (Class II). 2-year warranty

Technical specifications

Power source: Electric
Detector: Yes
Detector type: Non-contact infrared
Voltage: AC 220-240 Volts
Rated power: 1500-1900 W
Frequency: 50/60 Hz
Motor type: Asynchronous capacitor motor
Protection class: Class II (double insulation)
Drying time: 10-15 seconds
Detection distance: 15-20 cm
Waterproof rating: IPX23
Certification: CE
Weight: 2.2 kg
Dimensions: L 239 × D 170 × H 268 mm
Use: Professional and residential
Warranty: 2 years

1. When your hand is approximately 15–20 cm below the air outlet, the device automatically detects it and begins blowing. You can adjust the distance between your hands and the air outlet. The device stops approximately 1 second after you remove your hands.

2. To avoid any accidental start-up caused by an object passing through the induction zone, the sensor activates after 0.2 seconds of continuous detection.

3. If the device operates continuously for more than 60 seconds, it will automatically stop to prevent prolonged operation due to an object fixed in front of the sensor.

Drying method

Step 1: With the backs of your hands facing upwards, perform a slow back-and-forth motion.
Step 2: With palms facing upwards, continue the back-and-forth motion slowly.
Step 3: Rub both hands together.

Recommended distance: 15 to 20 cm below the air outlet.