The use of so-called "disposable" and therefore short-term protective suits is essential in many sectors to protect workers against various risks they may encounter. These risks vary greatly from one profession to another, and it is of course impossible to have a single suit model that covers all the issues of all activities. Some suits have a fairly wide range of protection, but none offer "overall" effectiveness!
Furthermore, beyond the choice, it is essential to put on and carefully adjust the suit (hood, wrists, ankles) according to the recommended procedures and to follow a strict undressing procedure in the same way to avoid any contamination, because the risk is high during the intervention and undressing.
The combination recommendation by profession in detail
Let's find out what risks are associated with different activities and professions, and which wetsuit is best suited. You'll find our entire range of wetsuits, as well as all the prices, on our website.
Wood industry profession
Summary of the main risks in the timber industry:
There are many risk factors in the wood industry and the list below, although intended to be the most complete, is not necessarily exhaustive and may be amended depending on the particular nature of the wood-related profession.
Handling of chemicals and impregnation.
Application of glues, paints, varnishes , strippers and stains containing epoxy resins, acetone, rosin, aminoplast resin, isocyanates, formaldehyde, dichloromethane.
Use of solvents (white spirit, xylenes), insecticides, fungicides, creosotes for preventive or curative treatment.
Generation of very fine wood dust , particularly during sawing and sanding, which is harmful if it comes into contact with skin. The danger depends on the type of wood (hardwood, conifer, exotic).
Treated wood may contain chemicals such as formaldehyde.
Projections of hazardous dust or impregnating liquids.
Recommended combination types:
Combination type 5/6 (WLP in Weesafe range or 888832):
Protects against fine wood dust and low concentration chemicals.
Its self-adhesive flap protects the front of the body during treatments and brush applications.
Anti-static on both sides, zipper with self-adhesive flap, 3-piece hood, jersey cuffs, breathable material.
Also protects against aerosol sprays and low concentration chemicals.
Designed for maximum comfort thanks to its ultra-breathable material. Its blue color reduces dirt.
Standardized against radioactive particles.
Combination type 4B/5B/6B (WLPMP in Weesafe range):
Protects against aerosol sprays and low concentration chemicals.
Its waterproof seams and self-adhesive flap provide protection during preventative treatments and spray applications.
Anti-static on both sides, zipper with self-adhesive flap, heat-sealed waterproof seams, 3-piece hood, elasticated thumb loop.
Professions using phytosanitary products
Summary of risks in the phytosanitary profession
The use of plant protection products (phytopharmaceuticals) involves risks at every stage: preparation, application and cleaning.
Preparation: Significant risks of projection when handling or pouring liquid, powder or granular chemicals.
Application: Protection depends on the type of spray (high, medium or low).
Cleaning: Significant risks of skin contamination by splashes of contaminated water and aerosols when rinsing equipment.
Areas of activity concerned: Arboriculture, Viticulture, Horticulture, Market gardening, Large-scale crops.
Recommended combinations in the phytosanitary world
Type 3 (liquid splash proof) or Type 4 (spray proof) coveralls are recommended.
Protective clothing must meet specific requirements depending on the level of exposure (in accordance with ISO 27065:2017).
Type 4B/5B/6B combination (WLPMG Weesafe range):
Protects against phytosanitary risks.
Meets EN ISO 27065* with a C2 level of protection against pesticides. (*This standard assesses the effectiveness of clothing against the penetration and permeation of chemicals).
Designed with an integrated chin strap for a perfect fit to the protective mask.
Must be worn during spraying phases.
Zipper with self-adhesive flap, heat-sealed waterproof seams, 3-piece hood, elasticated thumb loop.
Combination Type 3B/4B/5B/6B (WLJ1 Weesafe range):
Optimal protection during the preparation phases of the porridges.
Resists the risk of strong projections during cleaning phases.
An elasticated thumb loop ensures a seal with protective gloves.
Anti-static treatment on both sides, zipper with triple protection (flap + zip + self-adhesive flap), heat-sealed waterproof seams, 3-piece hood, elasticated thumb loop.
Activities and professions in the oil industry
Summary of risks associated with the oil industry
Exposure to harmful chemicals.
Projections of liquids, dust, aerosols, oils and greases, hydrocarbons.
Explosive environments (ATEX zones).
Activities: Drilling, Refining, Maintenance, Transportation.
Recommended combinations:
The materials of the WeeJet, WeePro Max Plus and WeePro suits are coated with an anti-static treatment on both sides.
Combination type 5/6 (WLP or 888832):
Protection against low density projections and biologically contaminated dust.
Can be worn during production, packaging and maintenance tasks.
Anti-static treatment on both sides, zip closure with self-adhesive flap, 3-piece hood, jersey cuffs, breathable material, standardized against radioactive particles.
Type 4B/5B/6B combination (WLPMP Weesafe Medicom range):
Protection against aerosol splashes and low concentration chemicals.
Its waterproof seams and antistatic treatment on both sides allow it to cover maintenance operations on oil sites.
Can also be worn for protection against biological hazards without the risk of strong liquid splashes.
Anti-static treatment on both sides, zipper with self-adhesive flap, heat-sealed waterproof seams, 3-piece hood, elasticated thumb loop.
Combination type 3B/4B/5B/6B (WLJ1 Weesafe Medicom range):
Protection against splashes of concentrated chemicals under pressure.
Its high-density outer coating ensures optimal abrasion resistance (6/6 according to EN530) and significant tear resistance (3/6 according to ISO9073-4).
Anti-static treatment on both sides, zipper covered by triple protection, heat-sealed waterproof seams, 3-piece hood, elasticated thumb loop, light and flexible.
Construction and public works professions and activities
This category being quite broad with a plurality of stakeholders and different constraints, we will describe by profession and field of activity of the building.
Summary of risks and constraints encountered in the construction industry
Hazardous Dusts: Wood dust, silica and asbestos, rock and glass wool, titanium dioxide, lead, soot, cement, chromium/nickel/cobalt residues, slate, fiber cement, insulation fibers, plaster, organic dusts (mites, molds, microbes), insecticide/fungicide/fire retardant residues, ceramic fiber.
Liquid chemicals: Butanone oxime, solvents, strippers, degreasers, descalers, refrigerants, glues, impregnation products, varnishes, acids (hydrochloric, hydrofluoric), detergents, caustics, bleach, antifungal/antiparasitic treatments, epoxy resins, polyurethane foam, sealants/jointing products, polymer resins (polyurethane, acrylic, polyester), waterproofing bitumen.
Biological risks: Contaminated wastewater.
High-risk occupations: Painter, Heating engineer, Plumber, Carpenter, Tiler, Facade installer, Cement installer, Carpenter, Roofer, Mason, Electrician, Insulation installer, Plasterer, Drywall installer, Demolitionist, Waterproofer, Cladding installer, Pipe installer, Sewer installer.
Recommended combinations in the construction industry
Type 5/6 combination (WLC Weesafe range):
Protection against all hazardous fine dusts, except asbestos.
Loose fit, jersey cuffs, anti-static treatment on both sides, zipper with self-adhesive flap, 3-piece hood, breathable material.
Can be worn as a dirt repellent garment. Available in blue.
Type 5/6 combination (WLC1 Weesafe range):
Designed specifically against asbestos.
Ultra-breathable SMS material, loose fit for freedom of movement.
Heat-sealed, waterproof seams, zipper with self-adhesive flap, wide 3-piece hood, certified against radioactive particles. Available in blue.
Type 5/6 combination (WLP Weesafe Medicom range or 888832):
Protection against low intensity liquid splashes.
Its waterproof outer film protects against low concentration chemicals.
Provides ideal protection against paints, solvents, degreasers and strippers.
Anti-static treatment on both sides, zipper with self-adhesive flap, 3-piece hood, jersey cuffs, breathable material.
Type 4B/5B/6B combination (WLPMP Weesafe Medicom range):
Protection against splashes in the form of spray or aerosol.
Provides ideal protection against impregnation products and pest control treatments.
Complies with asbestos standards with its heat-sealed seams.
Can be worn for protection against biological hazards without the risk of strong liquid splashing.
Anti-static treatment on both sides, zipper with self-adhesive flap, heat-sealed waterproof seams, 3-piece hood, elasticated thumb loop.
Type 3B/4B/5B/6B combination (WLJ1 Weesafe Medicom range):
Protection against strong liquid splashes.
Its waterproof outer film protects against certain high-concentration chemicals, and its heat-sealed seams provide perfect waterproofing.
Anti-static treatment on both sides, zipper covered by triple protection, heat-sealed waterproof seams, 3-piece hood, elasticated thumb loop, light and flexible.
Asbestos removal professions and activities
Summary of risks in asbestos removal activities
Permanent or occasional contact with asbestos.
Presence of asbestos in old structures (framework, roofs, cladding, insulated pipes, boilers, heating ducts, air conditioning/ventilation systems, floor/wall coverings, paints, wood/chipboard panels, electrical wiring, brick/concrete walls, contaminated soils, automotive components, roads).
The mechanical stresses during asbestos removal tasks are intense, requiring minimal mechanical resistance.
High risk of contamination during the procedure and undressing.
Recommended overalls for asbestos removal sites:
Body protection and masks are the most important PPE.
EN ISO 13982-1 (Type 5 impervious to solid particles) is required. INRS recommends disposable clothing that guarantees optimal protection with sealed seams.
Asbestos suits are often made of SMS, a breathable material, but must have sufficient mechanical resistance.
The inward leakage rate is a very important criterion. WeeCover Max 1 suits have an average leakage rate of 3.9% and an individual leakage rate of 4.3%, well below the 15% limit tolerated by the Type 5 standard.
The garment should be loose-fitting to facilitate tasks. Hoods should allow free movement of the head.
Combination type 5/6 (WLC1):
Specific asbestos full protection.
Wide cut for absolute freedom of movement during asbestos removal work.
Breathable material providing high protection against asbestos particles.
Heat-sealed waterproof seams, zipper with self-adhesive flap, wide 3-piece hood, standardized against radioactive particles.
Special asbestos packaging.
Combination type 4B/5B/6B (WLPMP):
Protection against small liquid and aerosol splashes.
Its outer polyethylene membrane makes it more waterproof than the WeeCover Max1 versions and protects against the cold in winter.
Heat-sealed waterproof seams, elasticated thumb loop, zip fastening with self-adhesive flap, wide 3-piece hood, standardized against radioactive particles.
Asbestos Kit (WAKAN):
Includes: WeeCover Max1 PPE Cat. III – Type 5/6 Hooded Coverall, FFP3 Protective Mask, 1 Pair of Gloves, 1 Pair of Goggles, Asbestos Tape Roll, 2 Recycling Bags, 1 Pair of Overboots.
Paint Industry
Risks associated with the use of paints and aerosols
Solvent-based paint is the most dangerous for health.
Water-based paint: Contains small amounts of solvents, pigments, and additives. Spray application produces aerosols.
Powder coating: Explosive hazards. Aerosol application, maintenance operations, color changes, loading/emptying, and cleaning equipment present hazards.
Solvent-based paint: Explosive risks. Application in aerosol form, maintenance operations and cleaning of equipment.
Risk of electrostatic discharge: Friction, contact or separation generates static electricity.
Areas of activity: Nautism, Aeronautics, Automotive, Metal framework, Furniture, Bodywork, General public painting, Railway, Household appliances, Maritime, Anti-corrosion painting, Public works, Civil engineering, Building.
Recommended combinations
The choice of clothing must be made according to the quantity of paint, the method of application and the environment (ventilated or not).
Spray application of solvent-based paint requires Category 3 Type 4 PPE (mist-proof clothing). The solutions offer seams that are waterproof against liquid aerosols and powder splashes.
Type 5/6 Combination (WLP):
Protection against low intensity liquid splashes.
Its waterproof outer film protects against low concentration chemicals.
Provides ideal protection against paints, solvents, degreasers and strippers.
antistatic treatment on both sides, zipper with self-adhesive flap, 3-piece hood, jersey cuffs, breathable material.
Combination Type 4B/5B/6B (WLPMP):
Protection against splashes of solvent-based paints in aerosol form.
Its waterproof seams and self-adhesive flap provide complete protection when spraying paint.
Suitable for environments with paint mist.
Anti-static treatment on both sides, zipper with self-adhesive flap, heat-sealed waterproof seams, 3-piece hood, elasticated thumb loop.
Type 5/6 Combination (WL-B-01 to WL-B-04 XL):
Protection against powder and water-based paint splashes.
Its covered seams and self-adhesive flap provide complete protection against aerosols and powders.
The entire back is ventilated with an ultra-breathable blue material.
Anti-static treatment on both sides, zip closure with self-adhesive flap, ventilated back in blue SMS, 3-piece hood, jersey cuffs, comfort triangle at the crotch.
Food preparation and industry professions
Risks in food preparation
Cleaning and disinfection of premises: exposure to dirt and microbiological and chemical contamination.
Fabric work clothes, if damp or soiled, promote the growth of bacteria.
Production: Blood splashes during cutting, food processing, food handling, salting, chemical preservation, drying. Risk of salmonella (slaughter/processing of meat, dairy products, fish, vegetables grown with organic fertilizers). Parasites carried by the human body.
Packaging: Handling of unpackaged perishable goods. High protection required if food is not further processed. Parasites carried by the human body.
Maintenance: Contact with food residue, risk of projection when checking valves and pipes. Significant biological risk.
Cleaning and disinfection: Chemical splashes (chlorinated alkalis, soda, nitric acid, peracetic acid, hydrogen peroxide, formalin, alcohols, aldehydes, hypochlorite) and contaminated food residues. Biological risks: viruses, bacteria, sporicides, endotoxins, fungi (molds, yeasts).
Recommended combinations for use in the food industry
The full range of coveralls protects against chemical and biological hazards. An alternative to fabric clothing is short-term nonwoven clothing.
Type 5/6 Combination (WL-P-01 to WL-P-04 XL):
Protection against low density projections and biologically contaminated dust.
Can be worn during production, packaging and maintenance tasks.
Anti-static treatment on both sides, zipper with self-adhesive flap, 3-piece hood, jersey cuffs, breathable material.
Type 5/6 Combination (WLPC):
Collared version offering protection identical to the WLP.
Anti-static treatment on both sides, zipper with self-adhesive flap, 3-piece hood, jersey cuffs, breathable material.
Combination Type 3/4/5/6 (WLPMP):
Protection against low density splashes (oil, blood and other food liquids).
Its waterproof seams protect against aerosols and very fine contaminated particles.
Achieved the best test results of EN14126 standard (Category 3 Type 4).
Anti-static treatment on both sides, zipper with self-adhesive flap, heat-sealed waterproof seams, 3-piece hood, elasticated thumb loop.
Combination Type 3B/4B/5B/6B (WLJ1):
Optimal protection against high-pressure cleaning in wet environments.
Resists concentrated products during cleaning phases.
Standardized against biological risks (contaminated blood and solids).
Its high-density outer coating ensures optimal abrasion resistance.
Triple-protected zipper, heat-sealed waterproof seams, 3-piece hood, elasticated thumb loop.
Activities with biological or infectious risks such as pandemics
Exposure to biological agents in various sectors: waste reprocessing, wastewater treatment, laboratories, food industry, emergency services.
Biological agents are classified into four groups according to the degree of infection.
Risk of contact with microorganisms (bacteria, molds, enteroviruses, salmonella, viruses), prions, NCTAs, fungi (yeasts, molds), endotoxins, sporicides.
Exposure to solid particles, liquid aerosols, contact with submerged contaminated solids, penetration of infectious agents.
Risky areas of activity: Waste treatment, water treatment, industrial treatments (tank cleaning, disinfection), agriculture (animal contact), laboratories/epidemics/emergency (research, pharmaceutical, medical), Maintenance and Upkeep in Industry and Construction (floor rehabilitation, HVAC maintenance, cooling towers).
Recommended combinations:
Protective clothing certified to EN ISO 14126:2003 achieves the best results against microorganisms in liquid, aerosol or solid particle form.
Type 5/6 Combination (WL-P-01 to WL-P-05 XXL):
Protection against biologically contaminated dust.
Can be worn during tasks with level 1 or 2 biological risks.
Its ergonomics ensure optimal comfort, and its antistatic treatment dissipates the charge on risk areas.
Anti-static treatment on both sides, zip closure with self-adhesive flap, 3-piece hood, jersey cuffs, breathable material, standardized against radioactive particles.
Combination type 4B/5B/6B (WLPMP:
Protection against biological risks when handling or disposing of potentially contaminated material, objects or animals.
Its waterproof seams provide protection against aerosol projections and very fine contaminated particles.
Achieved the best test results to EN 14126 in Category 3 Type 4.
Anti-static treatment on both sides, zipper with self-adhesive flap, heat-sealed waterproof seams, 3-piece hood, elasticated thumb loop.
Combination type 3B/4B/5B/6B (WLJ1):
Optimal protection against biologically contaminated liquids and dust.
Its high-density outer coating ensures optimal abrasion resistance (6/6 according to EN 530) and significant tear resistance (3/6 according to ISO 9073-4).
Triple-protected zipper, anti-static treatment on both sides, heat-sealed waterproof seams, 3-piece hood, elasticated thumb loop.
Trade and activities of roof or partition insulation
Risks in the insulation industry
Intense emission of fibers and dust, often in confined spaces.
Skin irritation caused by projected fibers and foams (dry or wet).
Natural wools (Linen, hemp, sheep's wool, cork): Emission of organic dust containing micro-organisms (mites, molds and microbes), residues of insecticides, fungicides and flame retardants.
Mineral wools (glass wool, rock wool, slag wool): Risk of skin irritation.
Polyurethane foam: Emanation of isocyanate vapors (MDI) during installation and spraying.
Recommended combinations:
Body protection must limit the passage of fibers as much as possible. Two specific models: WeeBack and WeeCover Max 1 Blue.
Protection standards: Category 3 type 5 for dry insulation (solid particles) and Category 3 type 5 and 6 for wet insulation (solid particles and limited sprays/splashes of non-hazardous chemicals).
The fiber leakage rate must be limited (EN13985-2 Type 5 standard tolerates up to 15%, SMS material with heat-sealed seams obtained < 5%).
Type 5/6 WeeBack (WLB) Combination:
Provides front face protection against wet splashes.
Its ventilated back provides optimal comfort during insulation tasks.
Its covered seams and self-adhesive flap provide enhanced protection against solid or semi-liquid splashes.
Anti-static treatment on both sides, zip closure with self-adhesive flap, ventilated back in blue SMS, 3-piece hood, jersey cuffs.
Type 5/6 WeeCover Max 1 Blue Coverall (WL-C1B-02 to WL-C1B-05 XXL):
Breathable hooded jumpsuit for optimal comfort in high heat areas (e.g. attics).
Its waterproof seams (flat heat-sealed) protect the insulating fibres and ensure very high resistance to tearing.
Designed for maximum comfort with its ultra-breathable material and a loose fit for freedom of movement and air circulation. Provides optimal sealing against asbestos fibers.
Sanitation and wastewater treatment
Risks linked to sanitation activities (sewers, treatment plants, etc.)
Numerous chemical and biological risks.
Heavy liquid projections during pipe leaks.
Chemicals: Hydrocarbons, petroleum solvents, chlorine, lime, heavy metals, glycol ethers, ferric chloride, bleach, flocculants, sulfuric acid, methanol, detergents, bleaching agents, insecticides, fungicides, herbicides, paints, glue solvents and resins.
Biological agents: Bacteria, fungi, protozoa, algae, viruses in wastewater.
High-risk occupations: Water quality agent, Water treatment equipment operator, Drinking water treatment technician, Sanitation worker, Sewer worker, Driver (pumping, cleaning, high and very high pressure cleaning).
Recommended combinations for sanitation-related jobs
Body protection must be suitable for chemicals and the risk of strong splashes.
Combination Type 3/4/5/6 (WLPMP):
Protection against aerosol splashes and low concentration chemicals.
Its sealed seams protect against aerosols and very fine contaminated particles when handling or disposing of potentially contaminated materials/objects/animals.
Achieved the best test results of EN14126 standard (Category 3 Type 4).
Anti-static treatment on both sides, zipper with self-adhesive flap, heat-sealed waterproof seams, 3-piece hood, elasticated thumb loop.
Combination Type 3B/4B/5B/6B (WLJ1):
Optimal protection against highly concentrated and contaminated chemical liquids.
Standardized against biological risks (contaminated blood and solids).
Its high-density outer coating ensures optimal abrasion resistance.
Anti-static treatment on both sides, zipper with self-adhesive flap, covered waterproof seams, 3-piece hood, elasticated thumb loop, light and flexible.
Combination Type 3B/4B/5B/6B (WLJ2):
Optimal protection against liquid splashes thanks to its heat-sealed seams and double adhesive flap.
Its zip with grip ring makes it easy to use with thick gloves.
Standardized against biological risks and solid radioactive particles.
Lightweight material, perfectly waterproof against liquid splashes, increased protection on the front with chin guard.
Combination Type 4B/5B/6B (WLPMG):
Protection against liquid and aerosol splashes.
Protects against pesticides according to EN ISO 27065 – Level C2*. (*This standard assesses the effectiveness of clothing against the penetration and permeation of chemicals).
Featuring a chin strap to fit the mask, and elastic at the wrists, ankles and waist for maximum comfort and protection.
Waterproof heat-sealed seams, anti-static treated material.
Mining industry-related occupations
Risks:
Numerous physical and chemical processes from excavation to metal transformation.
Hazardous products (liquid or dry): Crystalline silica, coal dust, arsenic, cobalt, lead (during excavation).
Various solvents (solvent extraction).
Sulfuric acid (extraction by smelting of ores, leaching).
Hydrofluoric acid (sample analysis).
Large amounts of suspended dust.
Activities: Excavation, Collection, Transport, Mining processing.
Recommended Combinations:
Type 5/6 Combination (WLC):
Protection against all hazardous fine dust.
Can be worn during excavation phases to protect against large quantities of airborne dust, particularly crystalline silica.
Loose fit, jersey cuffs.
Anti-static treatment on both sides, zipper with self-adhesive flap, heat-sealed waterproof seams, 3-piece hood, elasticated thumb loop.
Type 5/6 Combination (WLP):
Optimal protection against splashes of liquid products with low chemical concentration.
Also worn during beneficiation (separation of minerals) to protect against the various chemicals used.
Anti-static treatment on both sides, zipper with self-adhesive flap, 3-piece hood, jersey cuffs, breathable material.
Composite industry, carbon, fiber and resin working
Risks induced by working with composite fibers and resins
Chemical exposure to resin components, fiber dust (carbon, glass), aerosols and vapors of toxic organic compounds (styrene, acetone).
All processes are at risk: molding, impregnation, machining, cleaning, preparation of mixtures and storage of waste.
Molding: High styrene emission during spraying. Manual or spray application (convergent jets, low-pressure non-atomized, conventional high-pressure atomized).
Machining: Finishing phases (sanding, adjustment, deburring, drilling, trimming) release intense mists of polymer dust, which are irritating to the skin.
Cleaning: Handling solvents such as acetone.
Preparation of mixtures: Risk of projection.
Static electricity discharge: Friction/contact/separation of weakly conductive products (resins, fiberglass) can create static electricity and sparks if not evacuated. The WeePro and WeeBack ranges are antistatic on both sides.
Recommended Combinations:
Complete range of suits against splashes of aerosols, liquids and solid particles.
Combination type 5/6 (WLP Weesafe):
Protection during low pressure spray and roller applications.
The self-adhesive flap provides complete protection on the most exposed part of the body during the molding phases.
Its ergonomics ensure optimal comfort throughout the stratification phases.
Anti-static treatment on both sides, zipper with self-adhesive flap, 3-piece hood, jersey cuffs, breathable material. Collar version available.
Type 5/6 Combination (WLB Weesafe):
Combines protection and optimal comfort.
Covered seams protect against aerosols (molding), liquid splashes (cleaning) and dust mists (machining).
The ventilated back releases accumulated heat.
Anti-static treatment on both sides, zipper with self-adhesive flap, covered waterproof seams, 3-piece hood, Jersey cuffs, ventilated back.
Combination Type 4B/5B/6B (WLPMP Weesafe):
Protection against splashes of aerosols and low concentration chemicals.
Its waterproof seams and self-adhesive flap provide complete protection against the finest aerosols during the molding phases.
Anti-static treatment on both sides, zipper with self-adhesive flap, heat-sealed waterproof seams, 3-piece hood, elasticated thumb loop.
Type 5/6 wetsuit (WLC1B Weesafe):
Protection against intense dust during sanding, adjustment, deburring, drilling and routing phases.
Its waterproof seams and self-adhesive flap provide complete protection against various fiberglass or carbon dust.
Fully breathable material for optimal comfort. Blue color hides dirt.
Zipper closure with self-adhesive flap, heat-sealed waterproof seams, 3-piece hood.
Jobs related to the nautical industry, boat repair
Risks associated with the nautical industry
Use of numerous chemical products (solvents, paints, gelcoat, antifouling, resins) when stripping, painting and sanding hulls.
Exposure to intense dust, especially during molding.
Sanding: Projections of wood, plastic, fiberglass, lead dust.
Chemical stripping: Strong splashes of stripping solvents (methylene chloride), alkaline strippers (soda), acid strippers (hydrochloric, sulfuric, hydrofluoric, nitric, phosphoric).
Sandblasting: Projections of solid chemical substances (rust, paint residue, glue, varnish, resin).
Maintenance and cleaning operations: Handling and projections of detergent, disinfectant, stripping and descaling agents.
Hull treatments: Exposure to unsaturated polyester/epoxy/polyurethane resins, resin diluents (styrene, methyl methacrylate), organic solvents, paints, varnishes, glues.
Antifouling: Projections of biocide-type chemical products.
Gun/manual molding: Resin projections with styrene emissions.
Paint: Projections in the form of solvent-based paint aerosol.
Preparation of mixtures: Risk of projection of resin, catalysts and cobalt salts.
Cleaning tools: Handling solvents such as acetone.
Recommended combinations for shipyards:
Risk analysis is essential (form of the product, mode of attack, exact composition).
Type 5/6 Combination (WLB Weesafe):
Optimal protection and comfort.
Covered seams protect against aerosols (molding) and dust mists (machining).
The ventilated back releases accumulated heat.
Anti-static treatment on both sides, zip closure with self-adhesive flap, ventilated back in blue SMS, 3-piece hood, jersey cuffs.
Type 5/6 Combination (WLP Weesafe):
Protection during low pressure spray and roller applications.
The self-adhesive flap provides complete protection on the most exposed part of the body during the molding phases.
Its ergonomics ensure optimal comfort throughout the stratification phases.
Anti-static treatment on both sides, zipper with self-adhesive flap, 3-piece hood, jersey cuffs, breathable material. Collar version available.
Type 5/6 wetsuit (WLC Weesafe):
Hooded suit intended primarily for hazardous dust during sanding phases.
Designed for maximum comfort with its ultra-breathable material.
Anti-static treatment on both sides, zipper with self-adhesive flap, heat-sealed waterproof seams, 3-piece hood, elasticated thumb loop.
Combination Type 3B/4B/5B/6B (WLJ1 Weesafe):
Hooded suit waterproof against strong liquid splashes.
Its waterproof outer film protects against certain high concentration chemicals.
Provides ideal protection for stripping work with high-pressure cleaners.
Anti-static treatment on both sides, zipper with triple protection, heat-sealed waterproof seams, 3-piece hood, elasticated thumb loop.
Field of forensic science and clue research
Risks associated with the study of crime or offense scenes
Exposure to various health and safety risks at crime scenes.
Substances encountered: Powders (illicit drugs, explosives), liquids (solvents, detergents), plants/plant matter (soil, roots, seeds), materials of biological origin (saliva, blood, hair, skin cells), charred debris (ash), micro-materials (paint fragments), textile fibers.
Chemical hazard: Dry particles (toxic powder), liquid form.
Biological hazard: Blood spilled.
Cross-contamination: Risk of deposit of skin cells, hair fibers or clothing from the evidence collector.
Heat stress: Confined environments and meticulous movements can cause stress. Polyethylene suits are not very breathable.
Recommended combinations:
Must protect the evidence collector, prevent crime scene contamination, and provide comfort by reducing heat stress.
Short-term wear prevents cross-contamination.
Must provide a complete barrier (seams, zipper, waterproof material) against fine particles and droplets. Materials must be lint-free.
The WeeCover Max 1 model, made of breathable SMS material, helps reduce heat stress. Its waterproof heat-sealed seams offer maximum protection, and the self-adhesive flap on the closure ensures the front is waterproof.
Type 5/6 Combination (WLC1 Weesafe):
Hooded jumpsuit with integrated overboots.
Its breathable material provides real comfort during evidence surveys.
Its waterproof seams prevent any cross-contamination.
Heat-sealed waterproof seams, jersey cuffs, zipper with self-adhesive flap, large 3-piece hood.
Type 5/6 combination (WLPMI Weesafe):
Complete protection against low concentration chemicals.
Also prevents potential biological risks.
Standardized to EN14126 (Biological risk).
Heat-sealed waterproof seams, elasticated thumb loop, zip closure with self-adhesive flap, large 3-piece hood.
_UK_