3M 96HEXFL Scotch-Brite Pad

This sponge is a 3-layer laminated product. The scouring sponge is 2in1, it is a synthetic foam sponge combined with two abrasive sides. A yellow non-woven side with abrasive pins for ultra-intensive scrubbing and a green side for normal scrubbing.
Thanks to this Scotch Brite 2in1 sponge you can scrub and clean the most difficult residues such as the remains of burnt food.
The sponge is used for daily cleaning on most kitchen utensils and equipment:
- Pans and saucepans
- Cooking utensils
- Cast iron, granite, stonework, steel,
- Stainless steel surfaces: be careful, the black abrasive pins can scratch very strongly

The hexagonal shape promotes a good grip. In addition, thanks to its hexagonal shape, the scrubbing sponge offers more angles of attack for difficult to access dirty areas of utensils or surfaces in the kitchen.
Scotch-Brite™ 96HEX-FL sponge is certified by the international HACCP organization

Benefits

- 2 scrubbing faces
- 1 intensive side and 1 normal side
- For intensive scrubbing with current
- Allows you to clean most kitchen utensils
- The yellow face with the abrasive pins has a wear indicator
- The sponge rinses and cleans easily

Features

Shape: hexagonal
Dimension: Diagonals: 113 mm Sides: 98mm
Colors: Yellow face with black abrasive dots “Power Dots” Green abrasive face

Attention ! carry out a preliminary test on a small hidden surface of the support to check that it will not be damaged.
In any case, do not use:
- On polished surfaces
- On fragile or easily scratched surfaces

The product can be used dry or with water:
1. Hold the sponge in one hand. Both sides of the product can be used to scrub, depending on the intensity needed and one after the other.
2. For very attached residue or burnt food remains, use the yellow side with the abrasive pins to remove the largest. Turn the pad over to use the green side and remove all that remains and the grease.
3. Once food residue and grease are removed, rinse or wipe the surface with a clean cloth
4. Clean the Scotch-Brite™ 96HEX-FL sponge after use if necessary.

Proper care of the Scotch-Brite™ 96HEX-FL sponge will extend its life.
As soon as the product has lost its abrasive points or if it is frayed, it must be thrown away.
The sponge can be cleaned with warm water or dipped in a cleaning solution to dissolve dirt and grease.

Cleaning the product by hand:
1. Rinse the product under tap water to remove most of the dirt.
2. Wash it with soapy water to clean off grease and remaining dirt.
3. Rinse with clean water, ensure no debris remains and wring out the sponge.
4. Allow to air dry.

Dishwasher cleaning:
1. Rinse the product under tap water to remove most of the dirt.
2. Place it in the dishwasher.
3. After washing, let it air dry.