Round pouch decontaminating adhesive

Decontaminating adhesive

Ref.. MSS05020300000
Offer limited to quantity in stock
Offer within the limit of stocks
-30%
29,10 € HT
(34,92 € TTC)
RRP (1)
41,66 € HT (49,99 € TTC)
Amount
available
In stock (5) Packaging Sales unit
18 Unit
By Unit 1 unit

All about round pouch decontaminating adhesive

Description
MS-Sticker® Adhesive Pack of 16 square stickers. MS-Sticker® is an adhesive that embeds METALSKIN® technology in a polymer resin. The adhesion backing is made on the basis of a PET film and a high performance rubber based adhesive.

The self-decontaminating MS-Stickers adhesive is virucidal and bactericidal .
NF S90-700 certified: -99% of bacteria in 3 minutes and -99.97% in 1 hour.
Certified by the CNRS (CEMIPAI de Montpellier) under real environmental conditions: inhibits 68% of the virulence of SARS-CoV-2 in 1 hour and 99.5% between 2 and 4 hours.

The action of the MS-Sticker® adhesive is permanent and rapid . The contact of the hand with the adhesive is harmless to humans . The adhesive is easily identifiable thanks to its matt gray color.
The adhesive is applied both indoors and outdoors.

The MS-Sticker® adhesive will be your additional weapon for the health safety of surfaces. MS-Sticker® does not replace the disinfection of surfaces. It is even advisable to clean the film with your products usually used for your surfaces.

Benefits:

- Kills 99% of bacteria in 3 minutes
- Inhibits 99.5% of SARS-CoV-2 between 2 and 4 hours

- Proven effectiveness (Standard NF S90-700)
- Harmless to humans: formulation based on copper alloy
- Permanently protects: employees, customers, patients, ...
- Easy to use
- Made in France
- Easy to maintain

Applications of MS-Stickers:

You are an individual, MS-Sticker® is perfectly usable in your daily living spaces: In your apartment hall, your house ... etc.
You are a professional: MS-Sticker® will reassure your customers and employees with a simple, effective solution. Business, medical practice, hotel, restaurant / café / bar, EHPAD, professional spaces / co-working space, beauty / hairdressing professions, performance halls ...

Examples of applications:
- Handrail / Stair bar
- Door and refrigerator handles, etc. / Marshal's baton (cylindrical tube)
- Switches
- Grab / lift bar
- Counter / cashier
- Sanitary facilities (toilet bowl / brush)
- Doorbell ....

The application of the adhesive is very wide. You can apply the adhesive to any surface that may be touched.
However, due to its natural rigidity, the use of MS-Sticker® is reserved for flat, cylindrical and flat surfaces.

MS-Sticker® is available in several formats: roll, round or square pre-cut and A4 sheet.
Specific cutting possible, please contact us.

Square pouch contains:
• 1 adhesive A5 format
• 5 square stickers 100 x 100 mm
• 5 square stickers 50 x 50 mm
• 5 square stickers 25 x 25 mm
Characteristics
Native country
FRin FRANCE
Reference
MSS05020300000
Brand
MS-Sticker
See other products by this brand
Sales unit
1 unit By Unit
Barcode:
3770016975193
Weight (3)
0,37 Kg (3)
Manufacturer Warranty
GARANTIE 3 ANS (see conditions)
Similar products
See product similar to :
Round pouch decontaminating adhesive
Size of the package (4)
Length : 18,00cmWidth : 0,10cmHeight : 25,00cm
Quantity available (2)
18 Unit
Customs Code
3919
UN code
No recommendation
Manual
Installation protocol.

Due to its natural rigidity, the use of MS-Sticker® is reserved for flat, cylindrical and flat surfaces.
Attention, for an optimal use of MS-Sticker®, please do not superimpose the adhesive on the adhesive.
Ideally, for a cylindrical surface, it should be glued edge to edge.

Flat surfaces

1) Degrease the surface to be covered with an alcoholic solution and dry it well.
2) Measure the surface to be covered and choose the adhesive suited to its size, cut it to shape if necessary.
3) Separate the protective (satin) part from the active (mat) part avoiding contact with the fingers on the adhesive part.
4) Apply even pressure over the entire adhesive surface. To avoid air inclusions, it is recommended to use a squeegee.

Cylindrical surfaces

1) Degrease the surface to be covered with an alcoholic solution and dry it well.
2) Measure the surface to be covered and choose the adhesive suited to its size, cut it to shape if necessary.
3) Separate the protective (satin) part from the active (mat) part by 1 or 2 cm and stick the adhesive to the end of the cylinder.
4) Start by applying uniform pressure on the upper part, while gradually removing the protective film. Avoid contact with your fingers on the adhesive part.
5) Once the top has been applied and the protective film has been completely removed, apply even pressure over the entire surface of the cylinder. To avoid air inclusions, it is recommended to use a squeegee.

Cleaning protocol.

1) Cleaning with products usually used for surfaces.
2) Avoid bleach products which may cause unsightly oxidation.
3) Do not use alkaline products liable to passivate the copper contained in MS-Sticker® and inhibit its action.
4) The matte finish of MS-Sticker® makes it possible to erase many defects but on the other hand is a little more sensitive to traces of friction. This in no way alters the biocidal properties of the surface and the traces disappear with time and repeated cleaning.
Video
Installation video
complementary products
  • (1) Percentage calculated on the recommended retail price and / or the generally observed price and / or price having been offered for at least 1 month on the site.
  • (2) Approximate quantity.
  • (3) Estimated gross weight of product including packaging, used to calculate delivery costs
  • (4) Dimensions of product including packaging, used to calculate delivery costs
  • (5) Estimated restock date.
  • (6) We are obliged to make an exception for large items which exceed carriers' standard specifications. Some very heavy or large products require specific non-mechanizable transport treatment, and cannot be treated as standard deliveries. e.g. a retractable pole or similar long, fragile product requiring special care. In such cases, charges for 'special deliveries' and carriers concerned will be clearly indicated in the associated product information.