Renovator Refresher Renovator parquet Bona bottle 1 L

Renovator reviver Bona parquet.
Bona reviver Parquet is a ready-to-use aqueous phase protection product for most finished and prefinished floors in commercial and residential areas.
It revives scratched and dull surfaces by giving them a new finished look and reinforces their protection against wear.
Note: Applying Refresher on a satin or low gloss surface will enhance the brightness of the surface.
Always carry out a preliminary test.
Bona reviver parquet can only be used on finished wooden floors.
Do not use this product on floors that have been waxed or oiled.
Residues of wax and oil will prevent the brightener from adhering properly to the soil.
• Durable, based on polyurethane
• Simple and safe to use
• Dry quickly
• High coefficient of friction

Technical data:
Bonding agent: Polyurethane
Shine: High gloss
Dilution: Do not dilute
Drying: - To touch: 30-60 minutes
- Recoatable: minimum 2 hours
Application tool: Bona beige application pad
Consumption: Approx. 50 m2 / liter
Safety: This product is not classified as dangerous according to the European Directive 1999/45 / EC and its amendments.
Cleaning: Rinse application tools with clean water. Once dry, remove with acetone.
Storage: 2 years from the date of manufacture in the unopened original packaging
Storage / transport: The temperature must not go below + 5 ° C or exceed + 25 ° C.
Disposal: Waste and empty packaging must be handled in accordance with local regulations.
Conditioning: 1 liter

Preparation
Vacuum before wet cleaning to remove dust and grit. Clean with Bona Parquet Cleaner and allow to dry. Do not use on waxed or oiled floors, because the grease residues will prevent the reviver from hanging on the surface to be treated.
If in doubt, carry out a test.
Shake well and apply at room temperature, between 18-25 ° C.

Application:
1. Apply the brightener to a small section, drawing a sinuous line.
2. Spread the product with the Bona beige application pad working in the direction of the wood fibers.
3. Continue section by section until the entire surface is treated.
It is possible to walk with caution on the treated surface 2 hours after implementation, but wait 12 hours minimum before replacing carpets and furniture and solicit intensely.

Interview
Clean with Bona Floor Cleaner and Bona Blue Cleaning Pad.
When the floor begins to show signs of wear and needs renovation, apply a new layer of wood floor brightener. Use Bona Remover to remove the brightener layers.

Always test the adhesion on your coatings in an inconspicuous area before use.