Bodywork and painted sheet metal cleaner 200L

Not all fleets require a highly alkaline detergent every time: for vehicles washed weekly, a gentle shampoo is sufficient to remove road film while preserving the paintwork over time. This pH-neutral car body shampoo is designed for such frequent washing . Its concentrated formula effectively removes road film from the painted bodywork and sheet metal of trucks , tankers , and cars , restoring a glossy finish without leaving streaks after rinsing. It can be used for manual washing with a sponge or brush, with a high-pressure cleaner (3 to 5%), or in a roller car wash (3% at the nozzle). The two-drum pack of 200L drums directly supplies a dilution system or car wash for several weeks: each drum prepares 4,000 to nearly 6,700 liters of solution . Its formula is phosphate-free , EDTA-free , and NTA-free , with over 95% naturally derived ingredients. Made in France , it is used in truck wash stations , by haulers , tanker transport companies , rental companies , and fleet managers . Danger : Causes serious eye damage and may cause an allergic skin reaction; wearing gloves and safety glasses is mandatory.

Advantages of the 200L neutral car body shampoo:

- pH neutral : a gentle shampoo, suitable for frequent car washes
- Road film : it removes it effectively without using an alkaline product
- Glossy finish : it restores shine to painted bodywork and sheet metal
- No streaks after rinsing : a clean finish, further enhanced by a final rinse with fresh water
- Manual washing, high pressure or gantry washing : it adapts to all washing methods
- Drum format : 2 x 200 L to supply a dilution system or gantry for extended periods
- Yield : from 4,000 to nearly 6,700 liters of solution per drum
- Heavy goods vehicles, tankers and cars : one shampoo for the entire fleet
- Phosphate-free formula : without EDTA or NTA, with over 95% naturally derived ingredients
- Made in France : produced in France by Sodel

Technical specifications of the 200L neutral car body shampoo:

- Form : clear, concentrated liquid to be diluted
- Capacity : 2 x 200L drums (400L total)
- Pure pH : 7.5 ± 0.5 (neutral)
- Density : 1.015 ± 0.010
- Color : colorless
- Odor : characteristic
- Composition (detergent regulations) : less than 5% anionic and non-ionic surfactants; preservatives (methylisothiazolinone, benzisothiazolinone)
- Formula : phosphate-free, EDTA-free, NTA-free; over 95% naturally derived ingredients
- Surfaces : painted bodywork and sheet metal of heavy goods vehicles, tanker trucks and cars
- Dilution for manual washing : 3 to 5%
- High-pressure dilution : 3 to 5% at the nozzle
- Dilution in a roller gantry : stock solution prepared to obtain 3% at the nozzle outlet
- Instructions for use : Apply the solution from bottom to top using a low-pressure sprayer, sponge, or brush; leave for 5 minutes; clean with a sponge or mitt from the roof downwards; rinse with a hose or high-pressure cleaner using cold water from top to bottom, paying particular attention to areas where residue has accumulated; for optimal results, rinse thoroughly with fresh water or dry with a chamois leather.
- Precautions for use : do not apply to hot surfaces, do not allow the product to dry on the surface, respect the dosage instructions, do not mix with other cleaners
- CLP classification : Hazard, pictograms GHS05 and GHS07 (see remarks)
- Danger : Causes serious eye damage; may cause an allergic skin reaction
- Mandatory protection : gloves and eye protection
- Compliance : cleaning products for equipment that may come into contact with foodstuffs (decree of 08/09/1999 as amended)
- Storage : between 5 and 35 °C, in the original closed packaging

Manual washing: Dilute 3 to 5%. Spread the resulting solution either with a low pressure sprayer or with a sponge or brush, spraying the body from bottom to top to identify the parts already treated. Clean with a sponge or glove, starting with the roof and then working your way down. Rinse with a water jet or with a high pressure cleaner in cold water in an up and down motion, evacuating the foam residues and insisting on the parts that may retain product (mirrors, handles, rods, etc.).
Anti-fingerprint tip: For best results, perform the last rinse with fresh water or dry the surface with a chamois leather or equivalent.

Washing in a roller washing gantry: Depending on the type of machine, prepare a stock solution so as to obtain a 3% mixture at the nozzle outlet.

High pressure cleaning: Prepare a detergent solution in the tank of the HP machine and adjust the machine so as to obtain a concentration of 3% to 5% at the end of the lance.

Precautions for use:
- Do not apply the product to hot surfaces (bodywork having remained exposed to the sun).
- Do not let the product dry on the support.
- Respect the doses for use.
- Storage conditions: temperature 5 to 35 ° C and frost-free in the original packaging still uninjured.

Wording of the phrases mentioned in section 3:
H301 Toxic if swallowed.
H302 Harmful if swallowed.
H311 Toxic in contact with skin.
H314 Causes severe skin burns and eye damage.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H319 Causes serious eye irritation.
H330 Fatal if inhaled.
H400 Very toxic to aquatic organisms.
H410 Very toxic to aquatic life with long lasting effects.
H412 Harmful to aquatic life with long lasting effects.