Monobrush intended for polishing and spray method
Monobrush from 300 to 450 rpm
A high-speed monobrush is a machine whose
rotational speed exceeds 300 rpm . We thus distinguish machines whose speed ranges from 300 to 450 rpm. These materials are exclusively intended for use in buffing, polishing and spray method. We are therefore in the
context of maintenance and renovation of the metallization layer which will have been laid beforehand. The economic objective
being to absolutely avoid a stripping operation that is very heavy in terms of time and consumption of products and water.
For this type of use it will be necessary to use discs of red color preferably in the case of a
spray method .
This type of machine
is handled exactly like a low-speed machine in lateral oscillation from right to left and this by working by zone. This work is done using a sprayer integrated into the machine or simply a hand sprayer allowing the renovating and/or cleaning spray to be gradually spread over the floor.
Under no circumstances should this type of
equipment be used for stripping, cleaning or any other operation requiring a high torque and a suitable rotation speed. This could indeed cause significant damage to equipment and surfaces.
Monobrush more than 900 rpm
In this specific case, the machines must be equipped with a wheel at the front of the machine in order to stabilize the monobrush. The machine can offer rotation speeds of up to 1500 rpm. In this case, we are talking about an ultra-high-speed monobrush. The manipulation of this type of machine will be done in linear advance and no longer in an oscillating movement as is the case for a low or high speed.
The adapted discs are very specific and each brand (in particular 3M) offers adapted discs.
The effect of using this type of single-disc machine is to obtain a "Wet Look" effect or wet effect, making it possible to obtain reinforced protection due to the hardening effect as well as an incomparable shine.