Nilfisk professional water and dust vacuum cleaners
Professional and semi-professional water and dust vacuum cleaners
The Nilfisk MAXXI WD range includes four references of vacuum cleaners for professional use with tank sizes ranging from 20 to 75 liters. Easy to use on a daily basis and to maintain, they have a polyester fabric filter. These professional water and dust vacuum cleaners are composed of complete equipment and supports for accessories and cables, in addition, it is possible to adapt optional accessories.
The Nilfisk Aero water and dust range is a semi-professional range which will suit professionals for light use and demanding individuals.
The semi-professional range of Nilfisk Aero 20/25 vacuum cleaners offers a wide choice of references with corrosion-resistant tanks and a capacity of 20 or 25 liters. The transport of Aero vacuum cleaners is easy and the cleaning efficiency is amplified thanks to the manual unclogging of the filter. Equipped with the semi-automatic Push&Clean system which allows quick and easy cleaning of the filter. The Aero is a vacuum cleaner that will guarantee you surprising results and impressive performance for a compact design and reduced footprint.
Nilfisk Attix: Professional wet and dry vacuum cleaners for intensive use
The Attix 30 / Attix 40 / Attix 50 range of industrial vacuum cleaners has many advantages. These vacuum cleaners are easy to transport and use, robust, ergonomic and have a low noise level. The tank capacity is 30 liters. An automatic cut-off safety feature is provided in the event of overheating. An integrated accessory support as standard makes use and handling easier. In addition, Attix vacuum cleaners with the option are equipped with a power outlet to control a portable power tool such as a drill, sander....
Any loss of performance or flow rate is avoided thanks to the new "XtremeClean" system, XC model, fully automated for cleaning the cartridge filter . This filter cleaning can be done manually with the PC option, which means manual filter cleaning in "Push and Clean".
Just like the Attix 30, the Attix 40 or 50 industrial vacuum cleaners have a low noise level and automatically cut off in the event of overheating. An integrated accessory holder as standard for easy handling and use. It is possible to adapt the diameter of the hose according to requirements (27, 32, 36, 38, 50 mm). Tank capacities vary from 30 liters for the Attix 30 and 33 to 37 liters for the Attix 40, 42 liters for the Attix 44 and 47 liters for the Attix 50.
If you are looking for greater autonomy, the Attix 751 / 761 and 791 offer up to 70 liters
What is the recommended motor for a professional wet and dry vacuum cleaner?
The choice of motorization is directly linked to the use. There are now models with a double motor to reach powers of up to 3000 watts in the Nilfisk Attix range with depressions of 2x3600 l/min.
Some vacuum cleaners are dedicated to firefighters during floods , with the possibility of direct water evacuation.
Can you use a wet and dry vacuum cleaner in dust mode?
Yes, but BE CAREFUL, you will need to equip your vacuum cleaner with a specific dust filter and sometimes a dedicated vacuum cleaner bag. Indeed, most models are dedicated to vacuuming liquids with a filtering system that will not protect your motor as effectively against fine dust if the vacuum cleaner completely changes use by becoming a mainly dust vacuum cleaner. You will therefore need to refer to the manufacturer's recommendations in this change of destination.
How do I maintain my water and dust vacuum cleaner?
The most important thing is to rinse the tank and the filter and float after each use to prevent the tank and especially the filter from getting clogged, especially when drying. In addition, if you do not take the time to do it, your vacuum cleaner will eventually give off bad residual humidity odors. Beyond this olfactory and visual element, it is the lifespan of your vacuum cleaner that will be impacted and the possible taking of a breakdown under warranty. Do not forget that any warranty is linked to a "good father" maintenance of your water and dust vacuum cleaner even if it is a robust professional tool!
My water vacuum cleaner cuts out even though the tank is not full?
A water and dust vacuum cleaner tank, just like an extractor injector , a scrubber dryer , in short any equipment that sucks up liquid, has a float or sensor system to detect the notion of a full tank and thus avoid damaging the motor if the water level were to reach it.
If your engine cuts out, while the tank is not full, there are several things to check:
-> Does the liquid you are sucking up not foam excessively and in this case the foam level is misleading the capetru or the float? If this is the case, you will need to put a product to neutralize the foam in the bottom of your tank.
-> The full tank contactor is wet and needs to be dried so as not to send an erroneous signal. In most cases, rinsing and drying the vacuum cleaner will solve the problem.
I want to use my water vacuum as a discharge pump?
Nilfisk and Numatic offer this type of option, notably with the Attix 751-61 and Attix 751-71 MWF.
These "firefighter" versions can suck up to 300 liters per minute while discharging the liquid to a height. This series of Attix is often used in the event of flooding.
Numatic also offers a WVD1800AP version which has a 500 W submersible drain pump. You will find this range of flood vacuum cleaners for professional use on our Voussert website and above all in stock.