Tasli Jontec liquid wax Wax F5d maintenance 5 L

Taski Jontec liquid Waw (Ex Taski P11) is a solvent-based wax for the cleaning and maintenance of linoleum, cork floors and vitrified or unglazed wood floors. Cleans, maintains and protects the floors. Lusterable protective layer. Protects soils from premature aging. Marks of rubber, tar, grease and oils can be easily removed by spray method on P11-treated diapers.

Main properties

• Cleaner and maintenance product based on natural waxes (beeswax),
synthetic and solvent
• Nourishes the soil deeply
• Lustrable protective film
• Gives a natural look to the floor

Advantages

• Protects against moisture and premature aging
• Effectively removes oil and grease stains thanks to the spray method
• Easy to apply, fast drying
• Preserves the original appearance of your floors
• Gives a satin shine, the natural effect of your floors

Manual

Dosage:

Ready to use. Apply pure.
Application :

1) Initial treatment:

Sweep up / dust off the surface to be treated and check that it is completely dry. Shake well. Apply a thin layer evenly using an emulsion applicator or mop. Let dry. To harden the film and give shine: polish the surface with a single-disc machine equipped with a polishing disc (white or red). For a better hold
(or porous soils), it is best to apply a second coat of the same
way that the first.

2) Daily maintenance:

Spray method: add the product to the spraying system of the single-disc machine equipped with a suitable disc and clean the floor while spraying.
After a short drying time, buff the surface for more shine.
Dusting: Dust daily with a mop, fringe or disposable gauze over the entire surface.

3) Periodic maintenance:

If the protection is damaged where the traffic is intense, proceed with stripping the surface with TASKI Jontec Solve. Fill the sprayer with pure product, spray while passing the sweeper equipped with a blue disc. Once the surface is stripped, sweep, apply 1 to 2 coats of TASKI Jontec LiquidWax.

Important:
Leave the product at room temperature before use. Do not use on solvent-sensitive floors (eg rubber, asphalt, etc.). TASKI Jontec LiquidWax coated fabrics are flammable.

Transport reserve:

Reserve on shipping and order processing on this reference
We therefore reserve the right to refuse any order on this product where the shipment would seem impossible to us with regard to safety standards and the content of the order.
If the product is ordered alone it will not be delivered.
The product must be part of a minimum overall order or at least be ordered by 2 cans.