Dosage: Initial treatment: ready to use. Use pure.
Spray method: use 0.25 L of product for 0.5 L of solution (50%)
Application : 1) Initial treatment:
Dust the surface to be treated and check that it is completely dry. Apply a thin layer evenly using an emulsion applicator or mop. Apply the 2nd coat only when the 1st coat is completely dry. After drying, polish the entire surface with a white or red disc.
2) Daily maintenance:
Spray method: Add the product to the spraying system of the single-disc machine, equipped with a suitable disc and clean the floor while spraying. After a brief drying time, polish the surface for added shine. Wet sweeping: use a neutral detergent from the TASKI Jontec range (eg TASKI Jontec Asset, 1 to 2%). Perform a wet sweep. (We advise you to use a strongly wrung out fringe).
3) Periodic maintenance:
If the protection is damaged where there is heavy traffic, strip the surface using TASKI Jontec Solve. Fill the sprayer with pure product, spray while passing the monobrush equipped with a blue disc. Once the surface is stripped, sweep, apply 1 to 2 coats of TASKI Jontec Lenio. Applicators and discs are easily rinsed off with water.
Important: Shake well before use.
Completely remove solvent-based wax films before applying TASKI Jontec Lenio.
Several spraying and polishing operations may be necessary at first, then they may be more spaced.
Apply aqueous cleaning solutions sparingly and always remove residual water.