Solijavel more bleach disinfectant cleanser 5 L

Solijavel plus 4 in 1 is a cleaning bleach. Cleans and disinfects in one operation.
Removes all dirt, even encrusted.
The very rich formula in active chlorine of Soli Javel degreases and disinfects in a single operation the grounds (not protected by an emulsion) and surfaces.
Reserved for professional use, SOLI-JAVEL + 4 in 1 is a whitening cleaning / stain removal liquid based on concentrated bleach. Its chlorine-rich formula cleans and disinfects floors and surfaces in a single operation.
• SOLI-JAVEL + 4 in 1 is bactericide according to standards EN 13727 and EN 13697 in 5 min (20 ° C, dirt conditions), fungicide according to standards EN 13624 and EN 13697 in 5 min (20 ° C, dirt conditions) ) and virucidal according to standard EN 14476 in 5 minutes (20 ° C, conditions of
dirt).
SOLI-JAVEL + 4 in 1 complies with French regulations relating to products used for cleaning materials and objects intended to come into contact with foodstuffs, products and beverages for food (orders of September 8, 1999 and December 19, 2013) .
Use:
SOLI-JAVEL + 4 in 1 is particularly recommended for use in kitchens, hospitals, retirement homes, schools, communities and in all premises that require perfect hygiene. Disinfectant activity tested according to standards EN 13624, EN 13727, EN 14476 under the dirt conditions of the medical field. This biocide can also be used in the food industry, in industry, in the domestic and community sectors.

Transport reserve:
Reserve on shipping and order processing on this reference
Corrosive branded product
We therefore reserve the right to refuse any order on this product where shipping seems to us impossible with regard to safety standards and the content of the order.
If the product is ordered alone it will not be delivered.
The product must be part of a minimum global order or at least be ordered by 4 cans.

• Cleaning : dilute the product to 2.5% in water, apply
and rinse with clean water.
• Disinfection :
- Bactericidal: dilute the product to 19%, apply, leave on for 5 minutes and rinse with potable water.
- fungicide: dilute the product to 19%, apply, leave on for 15 minutes and rinse with potable water.
- virucidal: dilute the product to 12%, apply, leave for 5 minutes and rinse with potable water.
Do not apply on aluminum. The treated surface can be reused after drying

Wording of the phrases mentioned in section 3:
H290 May be corrosive to metals.
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H315 Causes skin irritation.
H318 Causes serious eye damage.
H335 May irritate the respiratory tract.
H400 Very toxic to aquatic organisms.
H410 Very toxic to aquatic organisms, causes long-term adverse effects.
H411 Toxic to aquatic organisms, causes long-term adverse effects.
EUH031 Contact with acids liberates toxic gas.