Installation of a cleaning plant
A cleaning unit connects to a cold or mixed water supply and operates without electricity or compressed air. It is simply fixed to the wall by drilling into it. The 1-product cleaning unit is preferably fixed to a solid wall. It will also be necessary to fix the 5-liter or 10-liter can holder depending on the choice of model.
Operation and choice of model
A venturi suction system allows the product to be sucked up using water pressure. It is then the choice of the calibration nozzle upstream of the product suction which allows, via a range of 14 colors, to choose a precise dosage from 0.41% to 17.65%.
The cleaning plants can have several configurations with one product or two products.
It will therefore be possible to alternate between the use of the two products.
Standard drum holders are generally designed for 5 litre drums, but there is the option of choosing drum holders for 10 litre drums.
Using Color Nozzles
It allows you to define the choice of calibration according to the desired concentration. Pack of 14 nozzles that clip directly onto the non-return valve.
Pink 0.41%
Violet 0.92%
Turquoise 1.47%
Yellow 1.65%
Orange 2.10%
Green 3.60%
Light brown 5.30%
Blue 7.35%
White 7.90%
Red 10.10%
Beige 15.00%
Black 16.80%
gray 17.65%
Without nozzle 17.65%
The cleaning plant in detail
Stainless steel and flexible braid
Resists 110°c - 18 bar. Absorbs water hammer.
Shock gun
Solid brass body. Resists 80°C - 25 bar. Fully covered in food grade rubber. D1/2F connection. Equipped with quick coupler.
Washing hose
Medium pressure industrial washing hose 20 bars at 70°c. Food grade design. Non-staining and anti-grease blue outer coating. High tenacity polyester fiber reinforcement. High adhesion intermediate layer.